Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
This test method, jointly developed by ASTM and the American Petroleum Institute (API), provides a standardized procedure for the potentiometric Karl Fischer titration determination of water in crude oils. It is formally designated as ASTM D4377-00 (Reapproved 2011), MPMS Chapterā¦
ASTM D4374-06 defines automated test methods for determining total cyanide, weak acid dissociable (WAD) cyanide, and thiocyanate in water and wastewater. These methods utilize continuous flow analysis paired with on-line thin film distillation and ultraviolet (UV) irradiation to accurately differentiateā¦
📖 Purpose, Scope, and Significance ASTM D4375-96 (Reapproved 2011) is under the jurisdiction of Committee D19 on Water and establishes a uniform standard for calculating, expressing, and symbolizing fundamental statistical parameters. The scope emphasizes that prior to performing many statisticalā¦
🔬 Scope, Preparation, and Size Classification ASTM D4371/D4371M standardizes the determination of washability characteristics for both coarse-coal and fine-coal fractions. As defined in Section 1.1, each size fraction tested must have an upper and lower size limit without overlapping adjacentā¦
🧪 Overview and Scope of ASTM D4373-21 ASTM D4373-21 defines a standard gasometric procedure for the rapid determination of carbonate content in soils and soft rock that can be readily broken down by mechanical effort. This test method utilizes aā¦
The ASTM D4370 −01 (Reapproved 2023) standard, “Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath,” outlines procedures for determining titratable acid and base content in anodic and cathodic electrocoat baths and their ultrafiltrates. The methods involveā¦
🔬 Scope and Significance The ASTM D4368-89 Standard Guide for Testing Poly(Vinyl Chloride) Resins provides a framework for evaluating PVC resins and vinyl chloride copolymers intended for coatings. The test methods listed in Table 1 have undergone interlaboratory testing perā¦
🧻 Scope, Classification, and Material Composition This specification, designated ASTM D4369 – 92, outlines the requirements for boxed facial tissues intended for industrial and institutional purchasers, such as government agencies, school boards, and industrial facilities. It covers a wide rangeā¦
The ASTM D4366-16 (Reapproved 2021) standard establishes procedures for evaluating the hardness of organic coatings using pendulum damping testers. These methods are fundamental for characterizing the physical properties of paints, varnishes, and related coatings applied to rigid plane surfaces, ensuringā¦
⚗️ Principle of Operation and Test Apparatus ASTM D4367-22 specifies a dual-column gas chromatography method with a backflush system and a flame ionization detector (FID). The liquid specimen, containing a methyl ethyl ketone (MEK) internal standard, is injected into aā¦