Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Test Method Scope and Definitions ASTM D4428/D4428M-14 covers crosshole seismic testing to determine velocities of horizontally travelling seismic waves, specifically primary compression (P-wave) and secondary shear (S-wave), in soil materials. The standard relies on first arrival times or intervalā¦
📐 Test Method Overview and Scope This test method, with designation D4429-09a, is designed for determining the California Bearing Ratio (CBR) of soils in place. It specifically evaluates the relative quality of subgrade soils but is also applicable to subbaseā¦
🧪 Apparatus and Oven Specifications The determination of nonvolatile content according to ASTM D4426 requires precise control of both the testing environment and the apparatus. Disposable aluminum foil dishes, strictly 60 mm in diameter by 16 mm in depth, serveā¦
The ASTM D4427-23 standard provides a classification system for peat samples through laboratory testing. Peat is defined as a naturally occurring organic soil derived from decomposing plant material in water-saturated, anaerobic environments. This standard is crucial for consistent naming andā¦
📐 Test Method Overview and Scope ASTM D4424-09 (Reapproved 2014) specifies the gas chromatographic analysis of commercial butylenes, butylene concentrates, and butane-butylene mixtures. It covers components at concentrations of 0.05% or greater, including propane, propylene, isobutane, n-butane, butene-1, isobutene, trans-butene-2,ā¦
ASTM D4425-24, officially designated as the Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method), provides a standardized procedure for evaluating the tendency of lubricating grease to separate oil when subjected to high centrifugal forces. Thisā¦
🔬 Scope and Significance of D4423-23 The ASTM D4423-23 standard specifies a volumetric titration method for the determination of total carbonyls, comprising ketones and aldehydes, in C4 hydrocarbons. While the method was validated using polymerization-grade 1,3-butadiene, its applicability extends toā¦
ASTM D4422-19 specifies the standardized gravimetric test method for determining the ash content of petroleum coke. This analysis is fundamental for evaluating coke quality, as the ash content directly indicates the amount of undesirable non-combustible residue present in the material.ā¦
ASTM D4420 – 94 (Reapproved 1999) defines a robust gas chromatographic methodology for quantifying aromatic hydrocarbons in finished motor gasoline. The standard provides validated procedures for determining benzene, toluene, C8 aromatics, C9 and heavier aromatics, and total aromatics, yielding essentialā¦
The ASTM D4421–94 (Reapproved 1999) standard, formally designated as an American National Standard, provides a definitive, empirical test method for determining the volatile matter produced by pyrolysis in petroleum coke. This critical parameter is used to estimate the calorific valueā¦