Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Overview and Scope of ASTM D4449-15 ASTM D4449-15 (Reapproved 2021) specifies a standard test method for the visual evaluation of gloss differences between coating surfaces of similar appearance. This method uses special types of lamps for illumination to identify…
The ASTM D4447-21 standard, formally titled the Standard Guide for Disposal of Laboratory Chemicals and Samples, is an essential resource for chemical laboratory managers, safety officers, and relevant staff. It provides targeted guidelines for the environmentally sound and safe disposal…
The ASTM standard D4448-01 (Reapproved 2019), officially titled “Standard Guide for Sampling Ground-Water Monitoring Wells,” provides a comprehensive framework for selecting and implementing sampling equipment and procedures. Published under the jurisdiction of ASTM Committee D34 on Waste Management, this guide…
📏 Scope and Summary of Test Method ASTM D4445-23 establishes a laboratory procedure for determining the minimum concentration of a fungicide or formulation required to prevent biodeterioration by sapstain fungi and molds on unseasoned lumber. The test evaluates efficacy under…
ASTM D4446/D4446M-13 is a standardized test method for evaluating the anti-swelling effectiveness of water-repellent formulations on wood and measuring the differential swelling of untreated wood in liquid water environments. It serves as a qualitative screening test for dimensional stability. 📐…
ASTM D4444-13 (Reapproved 2018), formally titled Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters, establishes a uniform framework for ensuring the accuracy and reliability of portable moisture measurement instruments. Overseen by ASTM Committee D07 on Wood…
The ASTM D4442-20 standard provides the definitive framework for the direct oven-drying determination of moisture content (MC) in wood, veneer, and wood-based materials, including those containing adhesives or chemical additives. Central to the standard are two distinct procedures — the…
🧪 Test Method Overview and Scope ASTM D4443-19 establishes a definitive procedure for quantifying residual vinyl chloride monomer (RVM) in vinyl chloride homo- and co-polymers. The method is validated for high-sensitivity analysis down to a detection limit of 5 µg/kg…
ASTM D4440-23 outlines a standardized laboratory test method for determining the dynamic mechanical properties of molten polymers, including thermoplastics and thermoplastic elastomers. Using mechanical or dynamic spectrometers, this nonresonant, forced-vibration technique measures the viscoelastic behavior of polymer melts as a…
🔬 Scope and Material Composition ASTM D4441-20 defines the standard for aqueous dispersions of polytetrafluoroethylene (PTFE). It encompasses virgin dispersions of PTFE homopolymers and modified homopolymers, where the modifier content does not exceed 1 % by weight. Non-PTFE materials, including…