Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🌡️ Exposure Conditions and Setup This practice specifies procedures for the xenon-arc exposure of plastics intended for indoor applications using window glass-filtered light. The exposure must be conducted in accordance with Practices G151 and G155, which detail the operation of…
🔬 Scope and Principle of the Test Method ASTM D4457-02 (Reapproved 2014) provides a standardized procedure for determining the total concentration of dichloromethane (DCM) and 1,1,1-trichloroethane (TCE) in paints and coatings using direct injection gas chromatography. The method has been…
This article provides a technical overview of ASTM D4455-85 (Reapproved 2014), a standard test method for the enumeration of aquatic bacteria using the acridine-orange epifluorescence direct-microscopic counting procedure. This technique is a cornerstone in environmental microbiology for quantifying bacterial populations…
ASTM D4456-17, titled Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins, provides standardized procedures for evaluating the physical and chemical characteristics of these specialized materials. This standard is specifically intended for the testing of new…
📐 Scope and Significance for High Purity Water Analysis ASTM D4453-17 provides the fundamental standard practice for handling high purity water samples required for the measurement of ever-decreasing levels of specified impurities encountered in modern high-pressure boilers, turbines, and sensitive…
🔬 Scope and Principle of ASTM D4454-85 ASTM D4454-85 (Reapproved 2009) establishes a standard test method for the simultaneous enumeration of total and actively respiring bacteria in aquatic systems using acridine-orange epifluorescence direct-microscopy. This procedure is specifically applicable to environmental…
ASTM D4451-22, under the jurisdiction of Committee D01, provides a standardized method for determining the pigment content of paints and several traffic marking materials via low-temperature furnace ashing. The procedure effectively removes the organic binder system through controlled combustion, leaving…
ASTM D4452/D4452M-22 standardizes X-ray radiography for soil samples to evaluate their quality and detect natural variations. This practice is crucial for geotechnical investigations, enabling the identification of disturbances in samples collected in thin-wall tubes or as extruded cores. 📐 Sample…
ASTM D445-24 establishes a precise method for determining the kinematic viscosity of liquid petroleum products, whether transparent or opaque. The procedure measures the time for a liquid volume to flow under gravity through a calibrated glass capillary viscometer. Dynamic viscosity…
🔬 Test Method Scope and Summary The ASTM D4450-85 standard specifies a test method for the analysis of zinc hydroxy phosphite pigment, focusing on the determination of zinc oxide (ZnO) and phosphorous acid (H₃PO₃) content. The zinc is measured by…