Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🎯 Scope and Significance Designation D5210‑92 (Reapproved 2007) establishes a test method for determining the degree and rate of anaerobic biodegradation of synthetic plastic materials, including formulation additives, under laboratory conditions. The test utilizes anaerobic‑digester municipal sewage sludge from aā¦
ASTM D5209-92, under the jurisdiction of ASTM Committee D-20 on Plastics, provides a standard methodology for determining the degree and rate of aerobic biodegradation of synthetic plastic materials. By employing an activated-sewage sludge inoculum from a municipal-wastewater-treatment plant, this testā¦
ASTM D521-02 (Reapproved 2019) provides a comprehensive framework for the chemical analysis of metallic zinc powder, specifically in the form commercially known as zinc dust used as a pigment in paints. This standard is essential for ensuring the quality, purity,ā¦
📐 Scope and Key Definitions This practice, designated D5208-14 (Reapproved 2022), covers specific procedures for fluorescent ultraviolet (UV) exposure of photodegradable plastics, conducted in accordance with Practices G151 and G154. It includes specimen preparation and evaluation of test results. Theā¦
📋 Scope and Significance of D5206-24 ASTM D5206-24 defines a standardized procedure for evaluating the windload resistance of rigid plastic siding. This test method is under the jurisdiction of ASTM Committee D20 on Plastics and Subcommittee D20.24 on Plastic Buildingā¦
🛠️ Scope and Summary of Practice ASTM D5207-20 establishes a standardized procedure for confirming the heat output of the 20‑mm (50 W) and 125‑mm (500 W) test flames employed in small‑scale burning tests on plastic materials. Under the jurisdiction of ASTM Committeeā¦
ASTM D5205-24 is a standard classification system for polyetherimide (PEI) materials used in injection molding and extrusion processes. It covers unfilled, filled, and reinforced PEI compositions, providing a basis for specification through line callout and suffixes. 📊 Classification System Overviewā¦
🔍 Scope and General Requirements ASTM D5204-22 defines the classification system for polyamide‑imide (PAI) molding and extrusion materials. It is intended for use as a standard basis for specification, particularly for procuring end items or parts fabricated from PAI. Theā¦
ASTM D5202/D5202M-16 establishes a standard method for evaluating the triaxial compression creep strength of chemically grouted soils. It is specifically designed to measure the long-term strength and deformation behavior of cylindrical specimens subjected to a constant sustained load under undrainedā¦
♻️ Scope and Source Classifications ASTM D5203-07 specifies the identification of recycled post-consumer high-density polyethylene (HDPE) molding and extrusion materials. This standard covers materials in pellet or chip form derived from defined post-consumer sources, enabling supplier and user agreement onā¦