Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5278/D5278M-09 (Reapproved 2017) provides a standardized procedure for determining the elongation of narrow elastic fabrics using a static-load testing method. Applicable to natural and man-made elastomers, this standard covers testing both before and after laundering. 📐 Scope, Specimens, andā¦
ASTM D5279‑21 outlines the standard methodology for determining the dynamic mechanical properties of plastics and composite systems in torsion. Using nonresonant forced‑vibration techniques (Practice D4065), this method captures viscoelastic data across a broad frequency range. The primary outputs include shearā¦
The ASTM D5277–22 standard provides a defined methodology for performing programmed horizontal impacts using an inclined impact tester. This test method is specifically designed to reproduce and compare shock damage, such as that experienced by lading during rail switching operationsā¦
📐 Overview and Scope The D5275-20 standard specifies the Fuel Injector Shear Stability Test (FISST) for measuring the percent viscosity loss at 100°C of polymer-containing fluids. This test evaluates the shear stability of polymers by passing the fluid through aā¦
📐 Scope and Container Configurations This standard specifies the procedure for the drop test of loaded containers by free fall. It covers boxes, cylindrical containers, bags, and sacks. For containers not exceeding 110 lb (50 kg), the test method fulfillsā¦
📖 Scope, Composition, and Key Definitions This guide provides a comprehensive framework for the chemical analysis of 1,3-butadiene product manufactured in North America. As defined in the standard’s terminology, 1,3-butadiene product is a hydrocarbon stream containing more than 99 %ā¦
ASTM D5272-08 (Reapproved 2021) defines specific test conditions for the outdoor exposure testing of photodegradable plastics. This practice focuses on the degradation mechanisms relevant to plastic litter and establishes standardized protocols based on Practices D1435 and G7 It emphasizes theā¦
📖 Scope and Application of D5273-24 ASTM D5273-24 serves as a comprehensive standard guide for the analysis of propylene concentrates, primarily cataloging the major grades produced across North America. As explicitly stated in Section 1.1, this document is a guideā¦
📐 Scope and Applicability ASTM D5271-02 provides a rigorous laboratory methodology for indexing the relative aerobic biodegradation performance of plastic materials exposed to an activated-sludge biomass. This standard is specifically intended for plastic formulations that are non-inhibitory to the inherentā¦
📐 Scope, Units, and Limitations ASTM D5269-15 defines the analytical procedure for determining the transmissivity of nonleaky confined aquifers. This method specifically analyzes the recovery of water levels following a period of constant-rate pumping or injection in a control well.ā¦