admin

admin

D525-12 – Standard Test Method Technical Guide

🔬 Scope and Terminology ASTM D525-12a (Reapproved 2019), adopted as British Standard 4347 and IP Designation 40/97, defines the standard procedure for determining the oxidation stability of finished gasoline. The test measures the “Induction Period” under accelerated oxidation conditions at…

D5249-10 – Standard Test Method Technical Guide

The ASTM D5249-10 (Reapproved 2021) standard specifies requirements for backer material used with cold- and hot-applied joint sealants in Portland cement concrete and asphalt pavement joints. This material limits sealant depth, acts as a bond breaker to prevent backside adhesion,…

D5247-92 – Standard Test Method Technical Guide

ASTM D5247-92 is a standard test method for determining the aerobic biodegradability of degradable plastics using specific microorganisms in submerged culture. Degradation is evaluated through weight loss, tensile strength loss, percent-elongation loss, and changes in molecular-weight distribution. This method supports…

D5248-04 – Standard Test Method Technical Guide

📐 Understanding the Scope and Classification of ASTM D5248 ASTM D5248-04 (Reapproved 2020) provides a standardized specification for reclaimed 1,1,2-trichloro 1,2,2-trifluoroethane, commonly known as CFC-113. It serves as a critical reference document for purchasers and those establishing in-house solvent recovery…

D5246-24 – Standard Test Method Technical Guide

🧪 Scope and Significance of D5246-24 ASTM D5246-24 covers the standard test method for the isolation and enumeration of the opportunistic pathogen Pseudomonas aeruginosa from water. Testing was performed on spiked samples using reagent grade water as the diluent. The…

D5245-19 – Standard Test Method Technical Guide

🧼 Foundational Importance of Chemically Clean Glassware In any microbiological laboratory, the integrity of experimental results hinges on the chemical cleanliness of the glassware and equipment used. ASTM D5245-19 (Reapproved 2024) directly addresses this critical need by establishing a uniform…

D5244-92 – Standard Test Method Technical Guide

📐 Scope and Key Definitions This practice covers a uniform procedure for concentrating viruses from water samples using a virus adsorption-elution cartridge filter method. It applies to drinking water volumes of 400 L or more, and is also suitable for…

D5242-21 – Standard Test Method Technical Guide

📐 Standard Overview and Scope ASTM D5242-21 establishes a rigorous methodology for measuring the volumetric flow rate of water and wastewater in open channels utilizing thin-plate weirs. The test method covers the entire measurement system, from the weir plate itself…

D5241-92 – Standard Test Method Technical Guide

🔬 Scope and Applicability This standard practice, designated D5241-92, provides standardized procedures for the micro-extraction of volatile and semi-volatile organic compounds from water using small volumes of organic solvents. It is applicable when the target compounds exhibit greater solubility in…