Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Apparatus and Specimen Setup The Pusey and Jones plastometer is designed for precise indentation measurement. The indentor consists of a vertical steel shaft with a polished spherical tip of 3.175 mm diameter, made from noncorrosive, wear‑resistant hard metal. The…
🧪 Scope and Significance of ASTM D5308-92 ASTM D5308-92 provides a comprehensive framework of standard test methods specifically designed for characterizing semi-flexible cellular urethanes used in energy absorption applications. These materials are critical for automotive components such as arm rests,…
📐 Scope and General Requirements This specification covers the grade of cyclohexane identified as “cyclohexane 999” in accordance with ASTM D5309-22. The standard defines the required purity, maximum allowable impurities, and physical properties. For conformance, all observed or calculated values…
📜 Scope and Summary of ASTM D5307-97 This standard test method, officially designated D5307-97 (Reapproved 2007), is an American National Standard for the determination of the boiling range distribution of water-free crude petroleum. The method covers the boiling range through…
ASTM D5306-24 provides a standardized laboratory bench-scale test method for determining the linear flame propagation rate of lubricating oils and hydraulic fluids. This method is specifically designed for assessing the relative ignitability of fire-resistant fluids by observing flame travel along…
🧪 Overview and Scope of D5304-20 The ASTM D5304-20 standard provides a test method for assessing the potential storage stability of middle distillate fuels by applying oxygen overpressure. It specifically covers Grade No. 1D and Grade No. 2D diesel fuels…
📋 Scope and Significance ASTM D5305-23 provides a field method for measuring ethyl mercaptan in LP-gas vapor using length-of-stain tubes, with detection from 0.5 to 120 ppm by volume, specifically reliable at 5 ppm or more. This standard is important…
🔬 Overview and Scope of D5303-20 ASTM D5303-20 outlines a standard test method for determining trace concentrations of carbonyl sulfide (COS) in propylene using gas chromatography. This method is specifically applicable for quantifying COS concentrations within the range of 0.5…
The ASTM D5302-01 standard, commonly known as the Sequence VE test, is a benchmark for evaluating automotive engine oils in spark-ignition engines. It focuses on deposit formation and wear under low-temperature, light-duty conditions, such as stop-and-go driving. This test method…
The ASTM D5299/D5299M‑18 standard provides a comprehensive guide for the permanent decommissioning (closure) of groundwater wells, vadose zone monitoring devices, boreholes, and other associated equipment used in environmental activities. This guide is essential for mitigating subsurface risks associated with solid…