Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5329-20, developed under the jurisdiction of Subcommittee D04.33, provides a comprehensive suite of standard test methods for evaluating hot-applied, field-molded joint and crack sealants and fillers. These procedures are specifically designed for materials used in portland cement concrete (PCC)…
📐 Standard Overview and Scope ASTM D5328-92 (Reapproved 1997) provides a standardized test method for determining the volatile organic compound content at 40°C (VOC40) of non-heatset paste printing ink systems. This method is specifically designed for paste inks and vehicles…
📐 Scope and Terminology ASTM D5327-97 (Reapproved 2021) establishes a standardized laboratory practice for evaluating and comparing the transfer efficiency (TE) of spray-applied coatings. Transfer efficiency is strictly defined as the ratio of paint solids deposited on a target to…
📐 Scope and Significance of D5325-03 The ASTM D5325-03 (Reapproved 2021) standard formally titled Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints provides a direct laboratory method for determining the volatile fraction of aerosol…
This standard, designated D5326-22, covers a procedure for measuring color development in tinted latex paints for determining the efficiency of colorants, the tintability of base paints (or color acceptance), and the potential for poor color uniformity of applied paint films.…
📐 Types of Water-Borne Architectural Coatings The ASTM D5324-16 guide classifies water-borne architectural coatings into four types for specific applications. These coatings are organic finishes applied on-site to building surfaces at ambient temperatures. 🟦 Type 📏 Description 🎯 Typical Substrates…
📐 Scope and Applicability This practice (D5323 −19a) standardizes the determination of the 2 % secant modulus for polyethylene geomembranes. It applies to materials 0.5 mm to 5 mm thick, specifically using tensile data from D6693 The goal is to…
📋 Scope and Materials This test method, designated as D5321/D5321M-21, specifies a procedure for determining the shear resistance of a geosynthetic against soil or another geosynthetic under a constant rate of deformation. It is intended to model specific field conditions,…
ASTM D5322-23 serves as the definitive standard for conducting laboratory immersion tests on geosynthetics to evaluate their chemical resistance. Developed to address the shortcomings of the older EPA 9090 method (which has not been updated since 1992), this practice expands…
ASTM D5320-96 (Reapproved 2000) is an American National Standard for the determination of 1,1,1-trichloroethane and methylene chloride content in stabilized trichloroethylene and tetrachloroethylene. These test methods are essential for quality assurance in solvent production and reclamation, ensuring purity levels are…