A practical guide to DQE measurement for mammographic detectors — from radiation quality to noise power spectrum analysis IEC 62220-1-2, published in 2007, is the international standard that defines a unified method for determining the Detective Quantum Efficiency (DQE) of…

A detailed examination of four standardised test methods for evaluating microbend-induced optical loss in single-mode and multimode fibres IEC TR 62221 (Edition 2.0, 2012) is a Technical Report that describes four distinct methods for measuring the microbending sensitivity of optical…

IEC Technical Report 62210:2003 | Power System Control & Associated Communications | Cybersecurity Framework IEC TR 62210 is the foundational cybersecurity technical report for electric power system control and associated communications. It laid the groundwork for what later evolved into…

Qualification requirements, test methods, and performance criteria for inductors, chokes, and transformers used in power electronic systems IEC 62211, published in 2017, specifies the qualification requirements, test methods, and performance criteria for inductive components intended for use in power electronic…

A standardized test method for evaluating the immunity of integrated circuits to conducted electrical fast transient disturbances via non-synchronous injection IEC 62215-3, published in 2013, specifies a non-synchronous transient injection (NSTI) method for measuring the impulse immunity of integrated circuits.…

Understanding the core requirements for DVB-T receivers: from RF front-end performance to service information handling IEC 62216-1, first published in 2001, defines the baseline specification for digital terrestrial television receivers designed for the DVB-T (Digital Video Broadcasting — Terrestrial) system.…

Specifications and test methods for ceramic and glass DC suspension insulators used in railway overhead contact lines IEC 62199, published in 2004, specifies the characteristics, dimensions, and test methods for DC suspension insulators used in overhead contact line systems for…

A framework for describing, comparing, and integrating electronic system architectures using structured methods IEC PAS 62204, published in 2000 as a Publicly Available Specification, addresses the critical need for standardised methods in describing and specifying electronic system architectures. As electronic…

General requirements, construction specifications, and type-testing for enclosures used in LV assemblies up to 1000 V AC / 1500 V DC IEC 62208, first published in 2002 and revised in 2011, specifies the general requirements and type tests for empty…

Measurement procedures for determining the SAR of wireless communication devices used in close proximity to the human body IEC 62209-2, published in 2010, specifies the measurement procedures for determining the specific absorption rate (SAR) of wireless communication devices used in…

Standard: IEC 62195:2000 — Nuclear power plants — Control rooms — Supplementary control points Status: Withdrawn (replaced by IEC 60964 and related standards) ⚠️ Although IEC 62195 was officially withdrawn, its technical requirements for diverse/emergency control points remain embedded in…

Standard: IEC 62196 (Parts 1-3) — Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles ✅️ IEC 62196 is the foundational global standard for EV charging connectors, adopted by every major automotive market. Understanding its architecture…

Design, testing, and qualification of rectangular connectors for frequencies below 3 MHz IEC 62197-1, first published in 2006, specifies the performance requirements and test methods for rectangular connectors for electronic equipment with rated frequencies below 3 MHz. These connectors are…

A practical framework for identifying, analysing, and responding to risks in engineering and technology projects IEC 62198, published in 2013, provides application guidelines for project risk management. While the generic ISO 31000 standard defines risk management principles and framework, IEC…

IEC TR 62188 describes the D-11 HD-D5 helical-scan digital VTR format for 10-bit 4:2:2 HD video mastering on 1/2-inch tape with mild DCT compression at up to 440 Mbps. Overview of the D-11 (HD-D5) Format IEC TR 62188 describes the…

Safety requirements and test methods for rope access systems used in live working environments up to 36 kV IEC 62192, published in 2009, specifies the requirements for insulating rope access systems used for live working on electrical installations. This standard…

Requirements and test methods for telescopic insulating sticks used in live working up to 36 kV IEC 62193, published in 2003, specifies the requirements for telescopic sticks — also known as hot sticks or live line tools — used for…