This Technical Specification is part of the IEC 62239 series on process management for avionics, focusing on the preparation and maintenance of management plans for electronic Commercial Off-The-Shelf (COTS) assemblies used in airborne systems. Introduction to COTS Assembly Management in…

IEC 62232 (Edition 2.0, 2017) provides standardized methods for the determination of radio frequency (RF) field strength, power density, and specific absorption rate (SAR) in the vicinity of radiocommunication base stations. Its primary purpose is to evaluate human exposure to…

IEC 62233 (2005) specifies measurement methods for electromagnetic fields (EMF) generated by household appliances and similar electrical equipment in the frequency range up to 400 kHz. It covers both electric and magnetic field measurements, providing standardized test conditions, measurement distances,…

IEC TR 62235 (Technical Report, Edition 1.0, 2005) provides guidance on instrumentation and control (I&C) systems important to safety for nuclear fuel and waste storage facilities. It covers both interim storage (temporary, designed for decades) and final repositories (permanent, designed…

IEC TS 62228 (First Edition, 2007) is a Technical Specification that defines comprehensive test and measurement methods for the electromagnetic compatibility (EMC) evaluation of CAN (Controller Area Network) transceivers. Developed by IEC Subcommittee 47A (Integrated Circuits), this specification is essential…

IEC TS 62229 (Edition 2.0, 2017) is a Technical Specification that describes a comprehensive conceptual model for multimedia e-publishing and e-books. Developed by IEC Technical Committee TC 100 (Audio, Video and Multimedia Systems and Equipment), this specification provides the essential…

IEC 62230 (Edition 1.1, 2013) defines the spark-test method — also known as the sparker test — for detecting insulation defects in electric cables during the manufacturing process. It is a high-voltage online test that rapidly identifies pinholes, cracks, or…

IEC 62231-1 (Edition 1.0, 2015) specifies the dimensional, mechanical, and electrical characteristics of composite station post insulators for use in AC substations with voltages greater than 1000 V up to 245 kV. These insulators consist of a resin-impregnated fiberglass core…

IEC TR 62225 (First Edition, 2001) is a technical report providing harmonized guidance on terminology used in the field of connectors and mechanical structures for electronic equipment. Prepared by IEC Technical Committee TC 48 (Electromechanical Components and Mechanical Structures for…

IEC 62226-1 (First Edition, 2004) is an International Standard that provides methods for calculating the current density and internal electric field induced in the human body when exposed to low and intermediate frequency electric and magnetic fields (up to 100…

Permission Code Framework for Digital Content Distribution in Home Networks Permission Code Architecture and Framework IEC 62227 defines a digital rights permission code — a compact, structured set of permission information designed for multimedia home server systems. First published in…

Integrated Circuits – EMC Evaluation of Transceivers for Controller Area Network (CAN) EMC Testing Framework for CAN Transceivers IEC 62228-1 (first edition, 2018) establishes the general conditions and definitions for electromagnetic compatibility (EMC) evaluation of integrated circuit transceivers used in…

IEC TR 62222 (Edition 2.0, 2012) is a technical report that provides comprehensive recommendations for the fire performance of communication cables when installed in buildings. As modern offices and residential buildings become increasingly populated with data cables — often referred…

IEC 62223 (Edition 1.0, 2009) is an International Standard that provides a harmonized glossary of terms and definitions for the field of electrical insulators. Developed by IEC Technical Committee TC 36, this standard serves as a critical reference document for…

IEC TS 62224 (Edition 2.0, 2013) is a Technical Specification that defines a comprehensive conceptual model for digital rights management (DRM) in multimedia home server systems. As high-speed data transmission, large-volume storage media, and ubiquitous network services became mainstream, protecting…

General Definitions, Test Methods and Acceptance Criteria Understanding Polymeric HV Insulators: Materials and Construction IEC 62217 is the cornerstone international standard that establishes uniform definitions, test methods, and acceptance criteria for polymeric high-voltage (HV) insulators used in both indoor and…

Specifications, Designation System and Testing for Formed Wire Aerial Conductors Formed Wire Technology and Designation System IEC 62219 (first edition, 2002) specifies the electrical and mechanical characteristics of concentric-lay overhead conductors made from wires that are formed or shaped before,…