Published: May 16, 2026 | Category: Networked AV Systems | Standard: IEC 62379-5-2:2014 IEC 62379-5-2 defines the signalling protocol for the common control interface applicable to networked digital audio and video products operating over IP networks. This standard is part…

Published: May 16, 2026 | Category: Reliability Engineering | Standard: IEC TR 62380:2004 IEC TR 62380 is a Technical Report that provides a comprehensive reliability data handbook and a universal model for predicting the reliability of electronic components, printed circuit…

🔍 Scope and Purpose of IEC 62381 IEC 62381 is the international standard that defines the requirements and procedures for Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and Site Integration Tests (SIT) applied to automation systems in the process…

Published: May 16, 2026 | Category: Semiconductor Reliability | Standard: IEC 62374-1:2010 IEC 62374-1 specifies the standardised test method for time-dependent dielectric breakdown (TDDB) of inter-metal dielectric layers in semiconductor devices. As integrated circuit technology scales to smaller dimensions, the…

Published: May 16, 2026 | Category: Broadcast Video Systems | Standard: IEC 62375:2004 IEC 62375 defines the analogue interface standard for embedding digital data within the vertical blanking interval (VBI) of 625/50 progressive scan video systems. This standard, developed in…

Published: May 16, 2026 | Category: Maritime Navigation | Standard: IEC 62376:2010 IEC 62376 specifies the operational and performance requirements, methods of testing, and required test results for Electronic Chart Systems (ECS) used in maritime navigation. An ECS is a…

Specifications, calibration methods, and engineering practice for sound intensity measurement instrumentation IEC TS 62370, published in 2017, is a Technical Specification that specifies requirements for instruments used in the measurement of sound intensity. Sound intensity measurement is a powerful acoustic…

Published: May 16, 2026 | Category: HV Insulators | Standard: IEC TS 62371:2008 IEC TS 62371 is a Technical Specification that defines the dimensional and mechanical characteristics of hollow pressurised and unpressurised ceramic and glass insulators used in electrical equipment…

Published: May 16, 2026 | Category: Nuclear Instrumentation | Standard: IEC 62372:2006 IEC 62372 is an international standard that defines standardised measurement methods for determining the light output and intrinsic resolution of housed scintillators used in nuclear instrumentation. Scintillation detectors…

Published: May 16, 2026 | Category: Semiconductor Reliability | Standard: IEC 62373:2006 IEC 62373 defines the standardised bias-temperature (BT) stability test method for MOSFET devices, which is one of the most critical reliability tests in semiconductor manufacturing. The BT test…

💡 Standard Snapshot: IEC TS 62367 (Technical Specification, 2004) addresses the safety aspects of xDSL (Digital Subscriber Line) signals on circuits connected to telecommunication networks. It defines voltage and current limits, evaluates the crest factor and peak-to-average ratio of DSL…

💡 Standard Snapshot: IEC 62368-3 (Edition 1.0, 2017) addresses the safety aspects of DC power transfer through communication cables in audio/video, information and communication technology (ICT) equipment. It is part of the IEC 62368 series which has replaced IEC 60950…

Standardized framework for assessing electromagnetic field exposure from EAS, RFID, and similar short range devices — covering measurement, modelling, and compliance evaluation Introduction to EMF Exposure Evaluation for Short Range Devices Short range devices (SRDs) such as electronic article surveillance…

💡 Standard Snapshot: IEC 62364 (Edition 1.0, 2013) provides a comprehensive guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines. It covers erosion mechanisms, prediction methodologies, material selection, design considerations, and maintenance strategies for hydropower plants operating…

💡 Standard Snapshot: IEC 62365 (Edition 2.0, 2009) specifies the method for transmitting digital audio signals over Asynchronous Transfer Mode (ATM) networks. It defines how to pack digital audio samples into ATM cells, establish switched virtual circuits for audio connections,…

💡 Standard Snapshot: IEC 62366-1 (Edition 1.0, 2015, with Corrigendum 1:2016) specifies the usability engineering process for medical devices. It establishes a framework for analyzing, designing, testing, and validating the user interface of medical devices to minimize use errors and…

Ferrite cores are manufactured through a powder metallurgy process involving pressing and sintering at temperatures above 1200°C. Despite advances in process control, the manufacturing process inevitably produces cores with minor surface irregularities—chips, cracks, flash, and porosity. The critical engineering question…