Skip to content
  • Home
  • About
  • Privacy Policy
  • Contact Us
  • 🌐 中文

Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

TNLab
  • Home
  • About
  • Privacy Policy
  • Contact Us
  • 🌐 中文
  • ASME Standards
  • IEC Standards
  • ISO Standards
  • IEEE Standards
  • ASTM Standards
  • SAE Standards
  • API Standards
  • CSA Standards
  • BS Standards
TNLab
  • IEC Standards

CISPR 12: Vehicles, Motorboats and Spark-Ignited Engine-Driven Devices — Radio Disturbance Characteristics

Emission limits for automotive, marine, and small-engine equipment 1. Scope and Applications CISPR 12 specifies limits and measurement methods for radio-frequency disturbances produced by vehicles, motorboats, and spark-ignited engine-driven devices. The standard covers the frequency range of 30 MHz to…

  • admin
  • May 17, 2026
  • IEC Standards

CISPR 13: Sound and Television Broadcast Receivers — Radio Disturbance Characteristics

Emission limits and measurement methods for broadcast receiver equipment 1. Standard Scope and Historical Context CISPR 13 specifies limits and measurement methods for radio disturbance emissions from sound and television broadcast receivers. Historically, this was one of the earliest CISPR…

  • admin
  • May 17, 2026
  • IEC Standards

CISPR 14-1: Household Appliances, Electric Tools and Similar Apparatus — Electromagnetic Disturbance (Emission)

Emission requirements for household appliances, electric tools, and similar equipment 1. Standard Scope and Classifications CISPR 14-1 specifies the limits and measurement methods for radio-frequency disturbances generated by household appliances, electric tools, and similar electrical apparatus. The standard covers equipment…

  • admin
  • May 17, 2026
  • IEC Standards

CISPR 14-2: Household Appliances, Electric Tools and Similar Apparatus — Electromagnetic Disturbance (Immunity)

Immunity requirements for household appliances against electromagnetic disturbances 1. Standard Scope and Immunity Performance Criteria CISPR 14-2 specifies the electromagnetic immunity requirements for household appliances, electric tools, and similar apparatus. The standard defines three performance criteria for evaluating immunity test…

  • admin
  • May 17, 2026
  • IEC Standards

IEC ACEE 01: Environmental Certification Rules for Electrical and Electronic Products

Comprehensive Guide to IEC System for Certification to Environmental Standards The IEC ACEE 01 standard establishes the foundational rules and procedures for the IEC System for Certification to Environmental Standards (IEC ACEE). This system provides a globally recognized framework for…

  • admin
  • May 17, 2026
  • IEC Standards

IEC ACEE 02: Operational Procedures for Environmental Certification

Procedural Framework of the IEC System for Certification to Environmental Standards IEC ACEE 02 defines the operational procedures and administrative mechanisms that govern the day-to-day functioning of the IEC System for Certification to Environmental Standards (IEC ACEE). While ACEE 01…

  • admin
  • May 17, 2026
  • IEC Standards

CISPR 11: Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment — Electromagnetic Disturbance Characteristics

Comprehensive guide to emission limits and measurement methods for ISM RF equipment 1. Scope and Applicability of CISPR 11 CISPR 11 is the international standard that specifies limits and measurement methods for electromagnetic disturbance (emission) produced by industrial, scientific, and…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TS 62997:2017 – Magnetic Nearfield Hazard Evaluation for Electroheating Equipment (1 Hz to 6 MHz)

Standard: IEC TS 62997:2017 | Edition 1.0 | TC 27: Industrial Electroheating and Electromagnetic Processing | Published: June 2017 📘 Scope: This Technical Specification provides methods for evaluating hazards caused by magnetic nearfields from industrial electroheating (EH) and electromagnetic processing…

  • admin
  • May 17, 2026
  • IEC Standards

IEC 62999:2016 – Electric Underfloor Heating Performance Characteristics, Testing and Sizing

Standard: IEC 62999:2016 | Edition 1.0 | TC 59/SC 59C: Heating Appliances | Published: February 2016 📘 Scope: This International Standard applies to electrical underfloor heating in dwellings and similar buildings with a maximum load-bearing capacity of 4 kN/m². It…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TS 62993:2017 – Guidance for Clearances, Creepage Distances and Solid Insulation (1000-2000 V AC / 1500-3000 V DC)

Published: July 2017 | Edition: 1.0 | Category: Technical Specification | TC 109: Insulation Coordination for Low-Voltage Equipment 💡 Key Insight: IEC TS 62993 fills a critical gap in the IEC 60664 series by extending insulation coordination guidance to the…

  • admin
  • May 17, 2026
  • IEC Standards

IEC 62995:2018 – Railway Cabling Installation Rules for Rolling Stock

Standard: IEC 62995:2018 | Edition 1.0 | TC 9: Electrical Equipment and Systems for Railways | Published: May 2018 📘 Scope: This International Standard specifies rules for the installation of cabling on board railway rolling stock, covering cable selection, sizing,…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TS 62996:2017 – Touch Current Safety for Electroheating Equipment (1 kHz to 6 MHz)

Standard: IEC TS 62996:2017 | Edition 1.0 | TC 27: Industrial Electroheating and Electromagnetic Processing | Published: September 2017 📘 Scope: This Technical Specification addresses safety assessments in the frequency range 1 kHz to 6 MHz for industrial electroheating (EH)…

  • admin
  • May 17, 2026
  • IEC Standards

IEC 62986:2017 – Plugs, Socket-Outlets and Couplers with Arcuate Contacts

Published: September 2017 | Edition: 1.0 | Category: International Standard | SC 23H: Industrial and EV Plugs and Socket-Outlets 💡 Key Insight: IEC 62986 standardizes the globally recognized locking-type plugs and connectors with arcuate contacts (commonly known as NEMA twist-lock…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TR 62987:2015 – Nuclear Power Plants – Use of FMEA for I&C Systems Important to Safety

Published: September 2015 | Edition: 1.0 | Category: Technical Report | SC 45A: Instrumentation and Control of Nuclear Facilities 💡 Key Insight: This technical report investigates whether FMEA methodology for nuclear I&C systems is ready for formal standardization. The conclusion…

  • admin
  • May 17, 2026
  • IEC Standards

IEC 62988:2018 – Nuclear Power Plants – Selection and Use of Wireless Devices for I&C Systems Important to Safety

Published: May 2018 | Edition: 1.0 | Category: International Standard | SC 45A: Instrumentation and Control of Nuclear Facilities 💡 Key Insight: IEC 62988 represents a landmark standard as it is the first international standard to address the use of…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TS 62989:2018 – Primary Optics for Concentrator Photovoltaic Systems

Published: March 2018 | Edition: 1.0 | Category: Technical Specification | TC 82: Solar Photovoltaic Energy Systems 💡 Key Insight: IEC TS 62989 is the first international specification dedicated to primary optics for CPV systems, addressing a critical gap where…

  • admin
  • May 17, 2026
  • IEC Standards

IEC TS 62977-3-1:2019 — Electronic Display Viewing Direction Dependence Based on Colour Difference

Evaluation of optical performance and angular colour shift for modern display technologies Introduction to IEC TS 62977-3-1:2019 IEC TS 62977-3-1:2019, part of the IEC 62977 series on electronic displays, provides a standardized methodology for evaluating the viewing direction dependence of…

  • admin
  • May 17, 2026
Prev
1 … 3,410 3,411 3,412 3,413 3,414 3,415 3,416 … 3,522
Next

Live Search

No results

Posts

ISO 26262-9:2018 — Functional Safety — ASIL-Oriented and Safety-Oriented Analyses

May 18, 2026

IEC 60826:2017 — Reliability-Based Design of Overhead Transmission Lines

May 15, 2026

API MPMS Chapter 11.1 (2004): Volume Correction Factors for Petroleum Measurement – A Technical Overview

June 22, 2026

API MPMS Chapter 11.1 (2004): Volume Correction Factors for Petroleum Measurement – A Technical Overview

June 22, 2026

Flame Arresters in Piping Systems: An Analysis of API Publication 2028 (1991)

June 22, 2026

Categories

  • API Standards
  • ASTM Standards
  • BS Standards
  • CSA Standards
  • IEC Standards
  • IEEE Standards
  • ISO Standards
  • SAE Standards
  • Uncategorized

From industrial fundamentals to cutting-edge technology, every standard embodies the practical wisdom of countless engineers.
TNLab brings you the engineering logic behind the standards.

TNLab — From Standards to Practice

Trending now

ISO 26262-9:2018 — Functional Safety — ASIL-Oriented and Safety-Oriented Analyses
IEC 60826:2017 — Reliability-Based Design of Overhead Transmission Lines
API MPMS Chapter 11.1 (2004): Volume Correction Factors for Petroleum Measurement – A Technical Overview
API MPMS Chapter 11.1 (2004): Volume Correction Factors for Petroleum Measurement – A Technical Overview

Copyright © 2026 - CreativeThemes

Terms & Services | Privacy Policy