IEC TR 63036 — PCM interface specification for smart card applications 1. Technical Background of IEC TR 63036 IEC TR 63036 is a technical report that specifies the electrical interface for phase-change memory (PCM) integrated into smart cards. Unlike conventional…

IEC TR 63038 — Standardized framework for evaluating video analytics systems 1. Introduction to IEC TR 63038 IEC TR 63038 provides a standardized framework for evaluating the performance of video analytics systems in digital video monitoring applications. As video surveillance…

Unified framework for content sharing, streaming, and multi-room AV distribution 1. Scope and Objectives of IEC 63029 IEC 63029 establishes interoperability requirements for multimedia home server (MHS) systems, covering the network architecture, content management, device discovery, and media streaming protocols…

Geometric and optical performance requirements for single-mode and multimode fibre connectors 1. Scope and Importance of IEC 63032 IEC 63032 specifies the optical interface requirements for fibre optic connector interfaces, defining the geometrical, mechanical, and optical parameters that ensure physical…

IEC 63033-2 — In-vehicle multimedia communication protocol specification 1. Overview of IEC 63033-2 IEC 63033-2 defines the communication protocol for multimedia data transmission within vehicle environments. As modern vehicles evolve into sophisticated mobile information hubs, the need for a standardized,…

Technical guidelines for measuring and evaluating the end-to-end efficiency of wireless EV charging systems 1. Introduction to IEC TR 63021 and WPT Efficiency Measurement IEC TR 63021 addresses a critical gap in the electric vehicle (EV) wireless power transfer (WPT)…

Technical specifications for modular I/O devices integrated with low-voltage switchgear in industrial automation environments 1. Scope and Context of IEC PAS 63023 IEC PAS 63023 addresses a convergence point between low-voltage switchgear and industrial automation: input/output (I/O) devices that are…

Particular requirements for reliable control in corrosive and humid environments 1. Scope and Application of IEC 63024 IEC 63024 specifies particular requirements for automatic electrical controls used in wastewater treatment plants (WWTPs) for household and similar applications. It supplements the…

System specification for 6.78 MHz resonant inductive charging with spatial freedom 1. Scope and Framework of IEC 63028 IEC 63028 specifies the AirFuel Alliance resonant baseline system specification for wireless power transfer (WPT). It defines the system architecture, communication protocol,…

Evaluation methodology and material selection guide for thermal class qualification 1. Introduction and Purpose of IEC TR 63017 IEC TR 63017 is a Technical Report that provides guidance on evaluating the thermal endurance of flexible insulating sleeving used in electrical…

A comprehensive technical guide to DALI-based control of LED modules: protocols, interoperability, and system design 1. Introduction to IEC TR 63018 and the DALI Ecosystem IEC TR 63018 provides technical guidelines for applying the Digital Addressable Lighting Interface (DALI) —…

Practical engineering guidance for implementing DALI-compliant control gear in lighting systems 1. Scope and Role of IEC TR 63020 IEC TR 63020 provides supplementary guidelines for the design, testing, and integration of control gear operating on the DALI bus. Control…

Standardized methodology for projecting LED lifetime based on accelerated testing 1. Scope and Applicability of IEC 63013 IEC 63013 specifies a standardized methodology for predicting the long-term luminous flux maintenance of LED packages under defined operating conditions. As solid-state lighting…

Performance requirements and design guidelines for electric traction current collection 1. Scope and Context of IEC TS 63014-1 IEC TS 63014-1 is a Technical Specification addressing the current collection systems for electric traction vehicles in railway applications. It focuses on…

Electromagnetic compatibility requirements for inductive EV charging systems 1. Scope of IEC PAS 63015 IEC PAS 63015 provides Electromagnetic Compatibility (EMC) guidelines for wireless power transfer (WPT) systems used for charging electric vehicles (EVs). It addresses the unique EMC challenges…

Design, Verification, and Application of JTAG/IEEE 1149.1 Receiver Fixtures in Board-Level Testing Introduction to IEC 63004 and Boundary Scan Fixture Fundamentals IEC 63004 establishes the requirements for receiver fixtures used in boundary scan testing of electronic assemblies, complementing the IEEE…

Performance, Functional, and Interoperability Requirements for Intelligent Video Content Analysis in Security Applications Introduction to IEC 63005-1 and the Role of Video Analytics in Modern Surveillance IEC 63005-1 is the first part of the IEC 63005 series, establishing comprehensive requirements…