IEC 62628:2012 provides comprehensive guidance on managing dependability aspects throughout the software life cycle. It addresses reliability, availability, maintainability, and integrity (RAMI) for software-intensive systems, bridging the gap between traditional hardware reliability engineering and software quality management practices. Core Purpose:…

IEC 62629-1-2:2013 establishes a standardized terminology and set of letter symbols for 3D display devices. As the first standardization effort in the IEC 62629 series, this document provides the foundational vocabulary needed for specifying, measuring, and comparing 3D display technologies…

Understanding IEC/TS 62622 for grating calibration, quality characterization, and precision positioning applications Introduction to Artificial Gratings in Nanotechnology Artificial gratings are precisely engineered periodic structures that serve as fundamental reference standards in nanoscale manufacturing and metrology. IEC/TS 62622 provides a…

Understanding the standardized methodology for measuring PC energy efficiency under IEC 62623 Introduction to PC Energy Measurement Standards IEC 62623 establishes a standardized methodology for measuring the energy consumption of desktop and notebook computers. As global energy regulations tighten and…

Standardized test methods for measuring electrical properties of carbon nanotubes under IEC 62624 (IEEE Std 1650) Introduction to Carbon Nanotube Electrical Characterization IEC 62624 (IEEE Std 1650) provides standardized test methods for measuring the electrical properties of carbon nanotubes (CNTs),…

Understanding the requirements for railway vehicle black box systems under IEC 62625-1 Introduction to On-Board Driving Data Recording Systems IEC 62625-1 defines the requirements for On-Board Driving Data Recording Systems (ODDRS) in railway vehicles — the “black box” for trains.…

Performance requirements, test methods, and classification for personal radiation detectors with spectroscopic nuclide identification capability IEC 62618, published in 2013 by IEC Technical Committee 45 (Nuclear Instrumentation), specifies the performance requirements, test methods, and classification criteria for spectroscopy-based alarming personal…

Standard: IEC 62619:2017 | Scope: Secondary lithium cells and batteries for industrial applications | Published: 2017 | Category: Battery Safety & Performance IEC 62619-2017 is the primary international standard governing the safety and performance requirements for secondary lithium cells and…

Standard: IEC 62620:2014 | Scope: Large format secondary lithium cells for industrial applications | Published: 2014 | Category: Battery Performance Testing IEC 62620-2014 is the international benchmark for performance characterization of large format secondary lithium cells, defined as cells with…

Standard: IEC 62621:2011 | Scope: Energy storage systems for railway electrification | Published: 2011 | Category: Railway Power Systems IEC 62621-2011 addresses the specialized requirements for energy storage systems integrated into railway electrification networks. It covers both wayside (trackside) and…

IEC 62614 is the international standard published in July 2010 by IEC Technical Committee 86 (Fibre optics) that defines launch condition requirements for measuring multimode fibre attenuation. This standard replaces the earlier IEC/PAS 62614:2009 and introduces the standardized concept of…

IEC 62615 is the international standard published in May 2010 by IEC Technical Committee 47 (Semiconductor devices) that defines the transmission line pulse (TLP) test method for electrostatic discharge (ESD) sensitivity characterization at the component level. Based on ANSI/ESD STM5.5.1-2008,…

IEC 62616 is the international standard first published in 2010 by IEC Technical Committee 80 (Maritime navigation and radiocommunication equipment and systems) that specifies the performance requirements, functional characteristics, and test methods for Bridge Navigational Watch Alarm Systems (BNWAS). A…

IEC TR 62617 is a Technical Report published by the International Electrotechnical Commission that provides systematic guidance on evaluating and reporting measurement uncertainty for the energy performance testing of home laundry appliances tested in accordance with IEC 60456. The second…

IEC 62610-4 is the international standard that defines cooling performance test methods for water supplied heat exchangers installed in electronic cabinets built to the IEC 60297 (19-inch) and IEC 60917 series dimensions. Published in August 2013 by IEC Technical Committee…

IEC/PAS 62611 is a Publicly Available Specification (PAS) published by the International Electrotechnical Commission in 2009, addressing the performance measurement methods for commercial vacuum cleaners. Unlike standards designed for household appliances, this specification covers the unique requirements of commercial-grade cleaning…

IEC 62612 is the international standard that defines performance requirements for self-ballasted LED lamps used in general lighting services with supply voltages above 50V. First published in 2013 and subsequently amended by AMD1:2015 and AMD2:2018, the consolidated edition IEC 62612:2018…