Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
The SAE J2525 standard, officially titled “SAE Design Guideline: Metal Belt Drive Continuously Variable Ratio (CVT) Automatic Transmissions,” provides comprehensive recommendations for engineers developing metal belt-based CVT systems. First issued in 2000 and stabilized in 2011, this information report covers…
This article provides an overview of the SAE J2530-2024 recommended practice, which defines performance, sampling, certification, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. The standard applies to…
Horizontal directional drilling (HDD) is a critical technique for installing underground utilities with minimal surface disruption. However, the safety of personnel and the public depends on rigorous adherence to established procedures. SAE J2519 provides comprehensive guidelines and precautions for personnel…
The SAE J2520-2013 standard establishes a unified framework for defining and specifying tracking equipment used in horizontal earthboring (directional drilling). This includes tracking transmitters, receivers, telemetry devices, and remote displays. By standardizing terminology and test conditions, the standard ensures comparable…
SAE J249 defines the test conditions, procedures, and performance specifications for 6-, 12-, and 24-volt manually actuated mechanical stop lamp switches. This standard ensures reliable operation under real-world conditions, covering everything from electrical loads and temperature extremes to endurance and…
SAE J250, the recommended practice for synthetic resin plastic sealers of the nondrying type, was officially cancelled in July 2013 with no replacement. This standard had been in use since 1959, but due to lack of users, the SAE Automotive…
SAE J2501-2012 is a surface vehicle standard that specifies requirements for round, screened and unscreened, 60 V and 600 V multi-core sheathed cables. Originally issued in 2001 and stabilized in 2012, this document is now withdrawn from active development and…
Understanding SAE J2489 and Its Purpose The SAE J2489 recommended practice defines a standardized durability test method for automatic transmission friction materials using the SAE No. 2 Friction Test Machine. Since its initial issuance, it has provided engineers with a…
The SAE J2494-3-2023 standard provides uniform performance criteria and test methods for push-to-connect fittings used with SAE J844 nonmetallic air brake tubing in vehicular air brake systems. This revision addresses the need to update test oil specifications to reflect current…
Scope and Purpose SAE J2494 establishes general and dimensional specifications for brass-bodied reusable push-to-connect tube fittings used in vehicular air brake piping. These fittings are intended for use with nylon tubing conforming to SAE J844. Performance requirements for the fitting…
SAE J2487_2019 is the latest revision of the recommended practice for evaluating automatic transmission plate clutch friction characteristics using the SAE No. 2 Friction Test Machine. The test defines a 3600 rpm stepped power procedure to measure performance variation as…
Understanding SAE J2488 and Its Purpose The SAE J2488 standard defines a 6000 rpm stepped power test performed on the SAE No. 2 Friction Test Machine. It is designed to evaluate the friction characteristics and durability of automatic transmission plate…