Category IEC Standards

Introduction IEC 62037-1:2021 defines the general framework for measuring passive intermodulation (PIM) levels in RF and microwave passive devices, including connectors, cable assemblies, filters, isolators, circulators, and antennas. PIM is a form of distortion that occurs when two or more…

Edition 1.0 (2012)IEC 62037-4Passive RF & Microwave Devices — PIM 1. Introduction and Scope IEC 62037-4:2012 is part of the IEC 62037 series covering intermodulation level measurement for passive RF and microwave devices. This Part 4 specifically addresses the measurement…

Introduction IEC 62038 specifies safety requirements and associated test methods for mains-operated flexible cables, wires, and cords used for connecting electrical appliances and similar equipment to the supply network. Covering rated voltages up to 450/750 V, the standard addresses the…

IEC 62032:2012, developed jointly with IEEE as IEEE Std C57.135, is a comprehensive engineering guide covering the application, specification, testing, and system integration of phase-shifting transformers (PSTs). PSTs are specialized power transformers used to control active power flow in transmission…

IEC TS 62033:2000 provides standardized methods for measuring and evaluating attenuation uniformity along the length of optical fibres. Attenuation uniformity — the consistency of optical loss per unit length along a fibre — is a critical parameter affecting the performance…

Introduction IEC 62034:2012 specifies the performance, safety, and reliability requirements for automatic test systems (ATS) used in self-contained battery-powered emergency luminaires and central battery systems. In modern buildings, emergency lighting is a life safety system that must function reliably at…

📅 Edition 2.0 (2014)🏷️ IEC 62035🔌 Discharge Lamps (Excluding Fluorescent) 1. Introduction and Scope IEC 62035:2014 is the definitive international standard governing safety requirements for discharge lamps, excluding fluorescent lamps. It covers high-intensity discharge (HID) lamps such as high-pressure mercury,…

IEC 62027:2011 establishes standardized rules for the preparation of object lists, including parts lists, bills of materials, function lists, and location lists used in electrotechnical engineering documentation. This standard is a critical component of the IEC documentation framework, ensuring that…

IEC 62028:2002 establishes standardized measurement methods for assessing the performance of digital television (DTV) receivers. Covering satellite (DVB-S), terrestrial (DVB-T), and cable (DVB-C) reception systems, this standard defines a comprehensive suite of RF, video, audio, and transport-stream measurement procedures that…

Technical Report: IEC TR 62029:2020 (Edition 2.0) | Type: Technical Report (non-normative) 💡 Core Value: IEC TR 62029 serves as the International Electrotechnical Commission’s strategic planning methodology for standardization. It provides a systematic framework for mapping the landscape of electrotechnical…