Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Understanding the operational and performance requirements for ship track control systems per IEC 62065:2014 IEC 62065:2014 defines the minimum operational and performance requirements for shipborne track control systems, aligning with IMO resolution MSC.74(69) Annex 2 and bridge alert management (BAM)…
Understanding surge phenomena, protection strategies, and SPD coordination per IEC TR 62066:2002 IEC TR 62066 catalogs the full spectrum of surge overvoltages in low-voltage AC power systems and provides foundational guidance for surge protection design. 1. Classification of Overvoltages in…
A technical deep dive into IEC 62067:2011 covering type tests, prequalification testing, and installation requirements for EHV cable systems IEC 62067:2011 specifies test methods and requirements for power cables with extruded insulation for rated voltages from 150 kV (Um =…
A technical guide to IEC 62068:2013 – screening tests, endurance testing, and partial discharge evaluation for insulation systems under impulse stress IEC 62068:2013 provides a general test methodology for evaluating the electrical endurance of insulating materials and systems subjected to…
Designing Safe Machines with SIL-Based Performance Requirements Introduction and Scope IEC 62061 is the machinery-sector-specific functional safety standard derived from the generic IEC 61508 framework. Officially titled “Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic…
Improving IEC 60112 Through Multi-Laboratory Testing of Insulating Materials Introduction and Scope IEC TR 62062:2002, titled “Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112,” documents a comprehensive inter-laboratory investigation into methods for determining…
A Blueprint for Intelligent Substation and Switchgear Modernization Introduction and Scope IEC TR 62063:1999, titled “High-voltage switchgear and controlgear – The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear,” is a forward-looking technical report that…
Key Insight: IEC TR 62064 bridges the theoretical gap between two critical shielding metrics — surface transfer impedance (ZT) and screening attenuation (as) — providing essential guidance for RF cable designers and EMC engineers working on coaxial cable performance above…
IEC 62057-1:2023 specifies the requirements for electrical test equipment used to verify the compliance of low-voltage switchgear and controlgear assemblies (LVSCA) with the IEC 61439 series. This is the essential companion standard for test laboratories, switchgear manufacturers, and certification bodies.…
Standard: IEC 62058-11 | Full title: Electricity metering equipment — Acceptance inspection — Part 11: General acceptance inspection methods | Scope: Lot-by-lot acceptance inspection of electricity metering equipment Introduction: Why a Dedicated Acceptance Standard? Electricity metering equipment — including smart…