Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📐 Scope and Material Specifications ASTM D1710-15 (Reapproved 2021) is the standard specification for extruded polytetrafluoroethylene (PTFE) rod, heavy-walled tubing, and basic shapes. This specification covers materials manufactured from the virgin PTFE resin defined in Specification D4894, as well as…
📐 Overview of D1711-24 Terminology ASTM D1711-24 is a standard terminology that compiles technical terms used in testing and specifying solid electrical and electronic insulating materials. It serves as a central reference for definitions balloted through Subcommittee D09.94 and the…
📐 Specimen Geometry and Dimensions ASTM D1708-18 defines the tensile testing of plastics using a standard microtensile “dog-bone” specimen. While superseded for general use by D638 (Type V specimen) or D882, it remains the standard for specific material specifications relying…
The ASTM D1709-24 standard specifies two test methods for determining the impact resistance of plastic film by the free-falling dart method. The energy required to cause failure is expressed as the weight (mass) of the dart dropped from a specific…
🔍 Scope and Significance of D1698-03 This ASTM standard provides a rigorous methodology for determining sediment and soluble sludge in service-aged insulating oils of petroleum origin. It is specifically applicable to oils with a low viscosity range of 5.7 to…
🧪 Scope and Significance of Scavenger Content Testing ASTM D1701-95 outlines test methods for determining arc-formed gas scavengers in askarels. It specifically covers tin tetraphenyl, phenoxypropene oxide (1,2-epoxy-3-phenoxypropane), and dicyclodiepoxy carboxylate (3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane-carboxylate). Measuring scavenger content assesses protection against arc-formed gases…
📜 Scope and Classification of Cellulose Terminology The ASTM D1695-07 (Reapproved 2019) standard, formally titled Standard Terminology of Cellulose and Cellulose Derivatives, serves as the definitive glossary for the industry. Issued under the fixed designation D1695, it is under the…
🔬 Scope and Significance This test method (D1696-95, Reapproved 2019) is intended for application to dissolving-type cellulose pulps prepared from cotton or wood. It is not directly applicable to unrefined pulps for use in chemical conversion processes because solubility equilibrium…
🧪 Specimen Geometry and Controlled Imperfection ASTM D1693-21 employs a precisely machined rectangular specimen to evaluate the environmental stress-crack resistance (ESCR) of ethylene plastics. Specimens are cut from compression-molded plaques prepared in accordance with Practice D4703 and conditioned per Practice…
📐 Thread Geometry and Form This specification establishes the geometric requirements for a dedicated 60° stub thread system designed specifically for fiberglass (glass-fiber-reinforced thermosetting-resin) pipe. As defined in the standard, fiberglass pipe is a tubular product containing glass fiber reinforcements…
ASTM D1688-17 defines standard procedures for determining copper concentrations in water and wastewater using atomic absorption spectrophotometry. These methods are essential for regulatory compliance, environmental monitoring, and industrial process control, and they cover a wide range of concentrations for both…
📘 Overview and Scope These test methods cover the determination of zinc in water, as per ASTM D1691-17. Two methods are provided: Test Method A (Atomic Absorption, Direct) for concentrations of 0.05 to 2 mg/L, and Test Method B (Atomic…