Category ASTM Standards

📏 Scope and Key Terminology of D3567-17 ASTM D3567-17 (Reapproved 2022) is the standard practice for determining the physical dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) pipe and fittings. The practice specifically covers the measurement of outside diameter (OD), inside diameter…

ASTM D3568 – 03 (Reapproved 2022) defines the standard procedures for evaluating EPDM (Ethylene Propylene Diene Terpolymers), including oil-extended grades. Developed by Subcommittee D11.23 on Synthetic Rubbers, these test methods are critical for referee analysis, quality control, and research and…

ASTM D3565-89 (Reapproved 2001) provides a standardized, accelerated test method for evaluating the corrosiveness of mechanical dishwasher detergents on overglaze tableware patterns. This test helps manufacturers and formulators assess decorative pattern durability alongside the relative aggressiveness of detergent compositions. 📐…

This technical summary covers the key aspects of ASTM D3566-03 (Reapproved 2023), a standard practice specifically designed for the determination of bromine and chlorine in rubber compounds through the oxygen combustion (Schöniger flask) method. The procedure is versatile, applicable to…

🔍 Scope and Applicability ASTM D3562-22 provides a comprehensive performance specification for woven drycleanable coat fabrics. It specifically covers the outer fabrics used in woven drycleanable topcoats, overcoats, and dress coats. The standard applies to fabrics composed of any textile…

This practice covers the application of floor polishes to maintain vinyl composition tile or flooring. Proper cleaning, polish application, removal, and maintenance are essential for protecting and beautifying the floor surface. The following sections outline the recommended procedures. 🧽 Initial…

The ASTM D3559 -15 standard provides standardized methodologies for the determination of dissolved and total recoverable lead in water and wastewater. The standard outlines four distinct test methods, each optimized for a specific concentration range and applicable matrix, utilizing atomic-absorption…

📖 Method Scope and Referenced Standards ASTM D3561 – 16 (Reapproved 2021) provides a standard test method for the determination of soluble lithium, potassium, and sodium ions in brackish water, seawater, and brines using atomic absorption spectrophotometry (AAS). This method…

🧪 Overview of Test Methods for Cadmium in Water ASTM D3557-17 covers the determination of dissolved and total recoverable cadmium in water and wastewater using atomic-absorption spectrophotometry and differential pulse anodic stripping voltammetry. It includes four distinct test methods tailored…

🧪 Overview of Test Methods for Cobalt Detection ASTM D3558-15 (Reapproved 2023) provides standard test methods for the determination of dissolved and total recoverable cobalt in water and wastewater using atomic absorption spectrophotometry. These methods are designed to accommodate various…

The ASTM D3556-23 standard, officially titled the Standard Guide for Deposition on Glassware During Mechanical Dishwashing, establishes a repeatable laboratory method for assessing the performance of automatic dishwashing detergents. By simulating multiple wash cycles in the presence of food soil,…

📐 Scope and Material Classification ASTM D3554‑20 establishes the requirements for track‑resistant thermoplastic high‑density polyethylene (HDPE) insulation for wire and cable. The base resin, prior to extrusion onto the conductor, must conform to Specification D1248 as Type III, Class C or D, Category 5,…