Category ASTM Standards

ASTM D6300-24, issued under the fixed designation D6300, is a standard practice for determining precision and bias data for test methods used on petroleum products, liquid fuels, and lubricants. Developed by ASTM Committee D02 on Petroleum Products, Liquid Fuels, and…

📐 Scope and Application This practice covers the design and operation of a program to monitor and control ongoing stability, precision, and bias performance of analytical measurement systems using statistical quality control (SQC) procedures. It is applicable to stable systems…

📐 Scope and Application of D6297−20 The ASTM D6297−20 specification establishes the material, testing, and application requirements for field-molded asphaltic plug joints (APJs). These systems are specifically designed for expansion joint sealing on asphalt concrete overlay and portland cement concrete…

🏗️ Materials and Manufacture Requirements According to Section 4 of ASTM D6298/D6298M, the manufacture of these sheets requires a fiberglass mat reinforcement to be fully impregnated and coated on both sides with a styrene-butadiene-styrene (SBS) thermoplastic elastomer modified bituminous coating.…

ASTM D6296−22 establishes a definitive procedure for the quantitative determination of total olefins in spark-ignition engine fuels via multidimensional gas chromatography. This method accounts for the complexity of modern fuel matrices, including oxygenates, and provides strict guidelines for sample dilution…

ASTM D6295/D6295M defines a precise method for measuring the force and elongation required to dispense light-duty pressure-sensitive film tape from a standard desktop dispenser. This test method generates critical performance data for quality assurance programs and product specifications for office…

📘 Scope and Applicability ASTM D6294/D6294M-13 (Reapproved 2024) defines a standard test method for evaluating the corrosion resistance of ferrous metal fastener assemblies intended for use in low-slope roofing and waterproofing applications. This method specifically encompasses components such as fasteners,…

🎯 Scope and Significance of D6290-19 This standard, designated D6290-19, outlines a standardized test method for the instrumental measurement of color attributes in plastic pellets. Specifically, it is intended for the color analysis of homogeneous, nonfluorescent, nearly-colorless transparent or nearly-white…

📐 Scope and Application This standard defines a method for quantifying oxygenates, paraffins, olefins, naphthenes, and aromatics (O-PONA) in low-olefin spark-ignition engine fuels using multidimensional gas chromatography. The lower detection limit for a single hydrocarbon component is 0.05 mass %.…

🧪 Overview and Scope of D629-15 ASTM D629-15, under the jurisdiction of ASTM Committee D13 on Textiles and Subcommittee D13.51 on Conditioning, Chemical and Thermal Properties, establishes standardized procedures for the quantitative analysis of textiles. The primary focus is determining…

📐 Scope and Specimen Requirements ASTM D6289-13 (Reapproved 2019) provides a standardized methodology for evaluating the dimensional stability of thermosetting plastics. It specifically measures the shrinkage between the mold cavity dimensions and the finalized molded part. This test method applies…

♻️ Scope and Purpose of ASTM D6288-23 ASTM D6288-23 establishes a standardized practice for the separation and washing of recycled plastics specifically for the preparation of analytical test samples. The procedure covers the visual separation of plastics by color and…