Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5661-95 (Reapproved 2001) outlines a test method for determining the relative solvency of petroleum oils used in ink formulations through a pentaerythritol ester of resin acids (PKP) titration method. This standard is essential for ensuring compositional consistency in petroleum…
The ASTM D5660-96 standard provides a rapid and efficient protocol for evaluating the toxicity of chemically contaminated water, as well as aqueous extracts from soil and sediment, using the luminescent marine bacterium Photobacterium phosphoreum. This test method is specifically designed…
ASTM D5659-14 provides a standardized test method for the determination of chlorophenoxy acid herbicides in various waste matrices using high performance liquid chromatography with ultraviolet detection (HPLC/UV). This method specifically addresses the analysis of 2,4-dichlorophenoxyacetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T),…
📐 Scope and Applicability ASTM D566-20, also recognized as British Standard 2877, provides a standardized method for determining the dropping point of lubricating grease. This test method is applicable for bath temperatures up to 288 °C; for higher temperature ranges,…
The ASTM D5658-20 standard provides methodological guidance for collecting waste samples from trucks. It focuses on unconsolidated solid wastes in bulk loads, utilizing various sampling equipment such as scoops, triers, and augers. This practice is integral to waste management industries…
📐 Scope and Significance ASTM D5657 – 07 (Reapproved 2023) specifically evaluates the ability of adhesives used for locking and sealing threaded fasteners to create leak-tight assemblies. This test method is critical for applications where fluid migration through the thread…
📖 Scope and Test Summary ASTM D5655-95 (Reapproved 2000) specifically covers the colorimetric analysis of Copper Dimethyldithiocarbamate (CDDC) in treated wood. CDDC is a naturally colored compound that can be quantitatively determined following solvent extraction. All values stated in SI…
📐 Specimen Geometry and Preparation The Thick-Adherend Metal Lap-Shear Test (D5656) is a critical method for characterizing the intrinsic shear behavior of adhesives. The specimen consists of two thick, rigid plates (adherends) adhesively bonded together. Typical adherend materials are high-strength…
This specification defines the requirements for ammoniacal copper quat Type B (ACQ-B) solution used in wood preservative treatments. Issued under ASTM D 5654 – 95 (Reapproved 2000), the standard ensures consistent composition and performance for effective protection. 📐 Composition and…
ASTM D5653-95 (Reapproved 2000) establishes the definitive requirements for Copper Dimethyldithiocarbamate (CDDC), a fixed water-insoluble wood preservative chelate formed in situ. Unlike conventional single-solution treatments, CDDC utilizes a precise dual-treatment process where a bivalent copper ethanolamine (2-aminoethanol) solution is followed…