Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Scope and Significance of D5671-20 ASTM D5671-20 is a standard practice that establishes laboratory procedures for preparing an etched, polished surface of granular and block coal samples for examination using reflected light microscopy. The primary objective is to create…
📐 Overview and Scope This test method (D 5669-95) covers a technique for evaluating a parameter, derived from curemeter testing of a standard hydrogenated nitrile rubber (HNBR) formulation, that is related to the percent residual unsaturation of the HNBR. It…
📐 Specimen Preparation and Standards ASTM D5670-95 (Reapproved 2023) establishes a standardized test method for determining the percentage of residual unsaturation—specifically the double bonds in unhydrogenated butadiene—in hydrogenated nitrile rubber (HNBR) using infrared spectrophotometry. As stated in the scope (Section…
🔍 Introduction and Scope of ASTM D5668-21 ASTM D5668-21 provides standardized test methods for determining the volatile matter content (moisture and other volatiles) in synthetic rubber. These methods are primarily intended for referee purposes and quality control assessments. The standard…
🧪 Scope and Applicability This test method, designated D5666-95 (Reapproved 2023), establishes a procedure for determining the purity of Type I, II, and III p-phenylenediamine (PPD) antidegradants as specified in Classification D4676. The method utilizes high performance liquid chromatography (HPLC)…
📐 Scope and Significance of D5667-21 ASTM D5667-21 covers a standardized test method for the determination of both total and water soluble ash in synthetic rubber. Issued under the fixed designation D5667, this method is primarily intended for referee purposes…
📐 Scope and Classification of Thermoplastic Fabrics ASTM D5665/D5665M – 99a (Reapproved 2021) establishes material requirements for thermoplastic fabrics used in cold-applied roofing and waterproofing assemblies. This material specification covers polyester, polyester/polyamide bicomponent fibers, and composites reinforced with fiberglass or…
🧮 Mass Balance Calculation Methodology ASTM D5663‑15 (Reapproved 2020) establishes a mass balance approach as the sole recommended method for validating recycled content in packaging paper and paperboard. Since no physical or chemical test method can determine the absolute recycled…
ASTM D5664-17 provides a crucial framework for assessing the structural implications of fire-retardant (FR) treatments on dimensional lumber. By establishing standardized procedures for both initial treatment effects and long-term thermal stability, this test method ensures that design professionals have reliable…
📐 Specimen Geometry and Elastomer Materials This test method uses Die C dumbbell specimens as specified in Test Methods D412. Three specific elastomer formulations are tested: nitrile (NBR), polyacrylate (ACM), and fluoroelastomer (FKM) oil seal materials. These represent the typical…