Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Intended Application ASTM D5752-10 (Reapproved 2017) defines the general, physical, chemical, and performance requirements for Supplemental Coolant Additives (SCAs) used to precharge heavy-duty engine cooling systems. These additives ensure adequate protection against corrosion, cavitation, and scale formation…
📐 Understanding Width and Length Specifications ASTM D5750/D5750M-95 (Reapproved 2020) provides a standardized guide for specifying the width and length of general-purpose pressure-sensitive tape. This guide is critical for aligning expectations between suppliers and users by defining modular measurement systems,…
ASTM D575‑91 (Reapproved 2024) is a standard test method for determining the compression‑deflection characteristics of rubber compounds, excluding hard rubber and sponge rubber. It provides two distinct procedures for measuring compression stiffness, which are crucial for material development and quality control…
📐 Scope and Significance ASTM D5748-95 (Reapproved 2019) establishes a standardized procedure for determining the protrusion puncture resistance of stretch wrap film. The test method evaluates a film’s ability to resist penetration by a probe at a standard low rate,…
📋 Scope and Classification of Reinforced and Plain Gummed Tape ASTM D5749-24 establishes the standard specification for plain and reinforced paper gummed adhesive tapes used primarily for securing and banding paper products and closing fiberboard boxes. This standard supersedes federal…
ASTM D5747/D5747M-21, developed under the jurisdiction of ASTM Committee D35 on Geosynthetics and its Subcommittee D35.02 on Endurance Properties, defines a standardized practice for evaluating the chemical resistance of geomembranes upon exposure to liquids. This practice is essential for determining…
ASTM D5746−24 provides a standardized classification system for federally-owned real property undergoing sale, lease, or transfer. Developed to satisfy the disclosure requirements of Section 120(h) of the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), as amended by the Community…
ASTM D5745-23 establishes a comprehensive framework for developing and implementing interim, short-term, or early action remedies at sites of waste contamination. The standard assists practitioners in managing, controlling, or reducing immediate risks while long-term remedial solutions are being evaluated, and…
📐 Scope and Applicability This practice covers typical equipment and methods for collecting samples of single or multilayered liquids, with or without solids, in drums or similar containers. It is specifically adapted for drums having a volume of 110 gallons…
🔬 Overview and Scope of D5744‑18 This standard test method provides a controlled laboratory procedure for weathering solid materials using a humidity cell. It is designed to enhance reaction‑product transport in aqueous leaching and measure the release rates of weathering…