Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Scope and Material Classification of Glass Fiber Strands ASTM D578/D578M‑23 establishes the standard specification for glass fiber strands used across general, industrial, and advanced composite applications. This specification covers continuous fiber and staple fiber glass strands, including single, plied,…
ASTM D5780-18 establishes standard test methods for assessing the axial compressive load performance of individual piles in permafrost. These methods are critical for designing foundations in cold regions, ensuring they withstand static loads under frozen ground conditions. The standard provides…
📐 Scope and Field Application ASTM D5779/D5779M defines the rapid field determination of specific gravity for rock and manmade materials used in erosion control, such as riprap. It is designed for expedient testing in quarries and work sites. The standard…
The ASTM D5777-18 standard outlines the equipment, field procedures, and interpretation methods for seismic refraction using compressional (P) waves. This guide is essential for subsurface investigation in various applications including geotechnical, environmental, and geological projects. It emphasizes mapping depth to…
📐 Scope and Applicability This test method covers the procedure for determining the resistance of a friction cone or piezocone as it is advanced into subsurface soils at a steady rate. It applies exclusively to electronic friction cones and excludes…
🧪 Introduction and Scope of D5776-21 The ASTM D5776-21 standard formally establishes a procedure for determining the Bromine Index (BI) of aromatic hydrocarbons using electrometric titration. The Bromine Index, defined in Section 3.1.1 of the standard, is the number of…
ASTM D5775-95 (Reapproved 2023) outlines a standard test method for determining bound styrene in styrene butadiene rubber (SBR) using refractive index measurement. This method is intended for solid uncompounded emulsion SBR with less than 55% bound styrene and is critical…
📐 Scope and Applicability This standard, designated D5773-21 / IP 446/09, specifies a test method for the determination of the cloud point of petroleum products and biodiesel fuels using an automatic instrument operating at a constant cooling rate. The method…
ASTM D5774-95 (Reapproved 2023) provides standardized test methods for the chemical analysis of extractables in synthetic rubbers, with primary application to uncompounded styrene-butadiene copolymers (SBR). These methods are essential for quality control and material characterization in the rubber industry. 🧪…
🌡️ Overview and Scope ASTM D5772-21 (IP 445/09) specifies an automatic linear cooling rate method for determining the cloud point of petroleum products and biodiesel fuels. It applies to transparent samples with a thickness of 40 mm, covering a temperature…