Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5974-20 specifies capillary gas chromatography methods for determining individual fatty and rosin acids in tall oil fractionation products. These acids are first converted to volatile methyl esters, then separated and quantified using two primary approaches. 📐 Scope and Significance…
📐 Scope and Materials ASTM D5973 – 97 (Reapproved 2017) specifies the material requirements for preformed elastomeric strip seals used in expansion joint sealing, along with their corresponding steel locking edge rails. The scope specifically addresses non-reinforced strip seals that…
📐 Scope and Applicability This standard, designated as ASTM D5972-23 (and technically equivalent to IP 435/22), defines an automatic phase transition method for determining the temperature at which solid hydrocarbon crystals form in aviation turbine fuels. While the instrumentation is…
ASTM D5970/D5970M (Reapproved 2021) provides a standardized protocol for assessing the long-term durability of geotextiles under outdoor exposure conditions. This test method specifically quantifies deterioration by measuring the reduction in tensile strength and elongation (strain) at failure, comparing exposed specimens…
ASTM D5971/D5971M−16 establishes the standardized procedure for obtaining a representative sample of freshly mixed Controlled Low-Strength Material (CLSM) as delivered to a project site. This practice is essential for verifying compliance with project specifications and ensuring material quality before placement.…
ASTM D5969-21 provides a standardized accelerated test method for evaluating the corrosion-preventive properties of lubricating greases when exposed to dilute synthetic sea water environments. This standard is an extension of Test Method D1743, adapted for environments involving dilute synthetic sea…
📐 Scope and Material Specifications ASTM D5968-24 establishes a standardized test method for evaluating the corrosiveness of diesel engine lubricants toward specific metal alloys at 121 °C. The scope specifically targets alloys of lead and copper commonly used in cam…
📐 Standard Scope and Apparatus This test method, under the jurisdiction of Subcommittee D02.B0.02 on Heavy Duty Engine Oils, establishes the engine test procedure for evaluating diesel engine oils for performance characteristics including viscosity increase and soot concentrations (loading). Commonly…
ASTM D5965-19, issued under the fixed designation D5965, provides standardized procedures for determining the density of coating powders. Density is a fundamental physical property essential for quality control, formulation analysis, and manufacturing consistency. This standard defines three distinct test methods,…
⚙️ Test Method Scope and Application ASTM D5966-22, officially titled the “Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine,” is a crucial lubricant evaluation procedure. Commonly referred to as the Roller Follower…