Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🌡️ Test Overview and Scope ASTM D5985-02 (Reapproved 2020) specifies an automated rotational method for determining the pour point of petroleum products. This procedure continuously rotates the test specimen against a suspended detection device during controlled cooling, covering temperatures from…
ASTM D5983-21 is the standard specification for Methyl Tertiary-Butyl Ether (MTBE) intended for blending with gasolines in automotive spark-ignition engines. Designated under D5983 with the year 2021 edition, this standard outlines requirements for fuel grade MTBE to ensure consistency and…
The ASTM D5982/D5982M−24 standard defines the procedure for determining the cement content of fresh soil-cement mixtures using the Heat of Neutralization Method. This quality control test is essential for verifying that the cement content in the field matches the mix…
📐 Calibration Techniques and Methods This guide covers techniques for calibrating a groundwater flow model, focusing on both manual (trial-and-error) and automated (inverse) methods. Calibration is the process of matching historical data by refining the model representation of hydrogeologic framework,…
🌍 Scope and Application This standard guide outlines an integrated, stepwise method for the qualitative conceptualization and quantitative characterization of groundwater flow systems, including the unsaturated zone. It is designed to assess natural or human-induced behavior and changes. The guide…
The selection and proper documentation of existing wells is a critical, cost-effective strategy in environmental site characterization. The ASTM D5980-16 (Reapproved 2024) standard provides a formal framework for evaluating the suitability of these pre-existing structures—ranging from domestic wells to high-capacity…
📋 Introduction and Purpose The ASTM D5978/D5978M-16 (Reapproved 2024) standard guide is designed to promote appropriate maintenance and rehabilitation procedures for groundwater monitoring wells. These wells are installed to evaluate the extent and nature of contamination, progress of remediation, and…
ASTM D5977-23, officially titled Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures, defines the minimum requirements for the manufacture of quality bearing devices used in demanding bridge and structural applications. These specialized bearings must reliably transfer…
📐 Scope and Summary of Test Method ASTM D5975-17 establishes a standardized laboratory protocol for assessing the stability of compost by measuring oxygen consumption. The test material is exposed to a well-stabilized compost inoculum derived from the organic fraction of…
ASTM D5976‑00 provides the standard specification for Type I polymer‑modified asphalt cement (PMAC) used in pavement construction. Developed to provide a reference for specifying modified asphalts, it reflects the properties of commercially available products using polymers such as styrene‑butadiene (SB)…