Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
With the proliferation of hybrid and all-electric vehicles, a standardized, hardware-based nomenclature for all-wheel drive systems is essential. The 2024 revision of SAE J1952, All-Wheel Drive Systems Classification, provides exactly this—a common engineering language that transcends marketing terms and softwareâŚ
The SAE J111 Recommended Practice provides a standardized glossary of terms for radial lip seals, covering everything from lip geometry to failure modes. This article highlights key definitions and design insights from the standard to improve communication and accuracy inâŚ
When a medium or heavy truck is involved in a collision, accurately describing the damage is essential for safety research, data collection, and communication among engineers. The SAE J1301-2022 standard provides a consistent method for classifying deformation sustained by trucksâŚ
SAE J1945, originally issued in 1990 and cancelled in August 2006, defined the dimensions and tolerances for cross-tooth companion flanges Type T used in driveline applications for commercial vehicles and buses. This article provides an overview of the standard, itsâŚ
Hydraulic systems in construction, agricultural, and industrial equipment often experience irregular pressure cycles with occasional surge peaks. Traditional hose selection per SAE J517 requires the maximum operating pressure to equal or exceed the highest peak, even if that peak occursâŚ
Decarburization is a critical surface condition in hardened and tempered metric threaded fasteners. It reduces surface hardness and fatigue strength, potentially leading to premature failure. This guide explores the effects, measurement, and prevention of decarburization, referencing the former SAE J121MâŚ
The SAE J999 standard defines the functional and design requirements for an automatic device that prevents a crane boom from exceeding its highest specified angle. This article provides a practical overview of the standard, key design considerations, and common pitfallsâŚ
Scope and Purpose of SAE J727 SAE J727-2002, titled Nomenclature—Crawler Tractor, was originally issued in 1954 and reaffirmed multiple times until its cancellation in February 2002. The standard provided a consistent set of names for major components peculiar to crawlerâŚ
Understanding the Infrastructure-Based Prescriptive Cooperative Merge SAE J3256-2024 defines a Cooperative Driving Automation (CDA) feature for infrastructure-based prescriptive cooperative merge. This Information Report provides a concept of operations (CONOPS) and a proof-of-concept test procedure for a Class D (Prescriptive) CDAâŚ
The SAE J1389 recommended practice, stabilized in 2011, provides a standardized method for evaluating the corrosion resistance of insulation materials used in surface vehicles, particularly for acoustical applications. This article offers a practical overview of the test method, including specimenâŚ