admin

Established in 1939 and stabilized in August 2011, SAE J678 is a Surface Vehicle Recommended Practice that defines requirements and guidelines for speedometers and tachometers used in automotive applications. As a stabilized document, it reflects mature technology and is no…

SAE J663 is a stabilized standard originally issued in 1948 and stabilized in 2013 by the SAE Truck and Bus Foundation Brake Committee. It defines requirements for rivets used in brake linings and bolts used in brake blocks for heavy…

Introduction to SAE J667 This SAE Recommended Practice establishes a uniform laboratory procedure for evaluating performance and wear of automotive brakes and brake drums by inertia dynamometer simulation. The code is applicable to hydraulic, air, or electrically actuated brakes, with…

The precision of language is as critical as the precision of math in engineering. For vehicle dynamics professionals, SAE J670 has long been the definitive source for standardizing terms. After more than 30 years without a major revision, the 2022…

The SAE J651-2015 Recommended Practice provides a comprehensive framework for evaluating the performance and efficiency of automatic transmissions and transaxles used in passenger cars and light trucks. Originally developed for twentieth-century designs, the standard has been stabilized to preserve the…

1. Purpose and Scope of SAE J661-2021 The SAE J661 Recommended Practice establishes a uniform laboratory procedure for securing and reporting the friction and wear characteristics of brake linings. Developed in the 1950s and revised in 2021, this standard is…

This article discusses the key requirements of SAE J64-2007, a standard for snowmobile vehicle identification numbers (VINs), including visibility, durability, and design considerations for engineers and manufacturers. Although cancelled in 2007, its principles remain relevant for design and compliance. Introduction…

Since its initial issuance in 1951, SAE J641 has served as the authoritative reference for hydrodynamic drive terminology. The 2019 revision clarifies definitions, adds equations, and ensures consistent communication across design, testing, and documentation. This article summarizes the essential terms…

Effective communication is the foundation of successful engineering projects. In the field of automatic transmissions, where precise hydraulic control is essential, using consistent and accurate terminology is non-negotiable. SAE J648:2011, Automatic Transmission Hydraulic Control Systems – Terminology, provides a standardized…

SAE J635-2018 is a SAE Recommended Practice that provides a standardized approach for mounting engine cooling fans. Applicable to fans up to 2000 mm in diameter, it defines bolt circle and pilot hole dimensions for both fixed-drive and clutch-drive applications.…