Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
In December 2019, SAE J717—a long-standing standard for auxiliary power take-off (PTO) drives on agricultural tractors—was officially cancelled, having been superseded by ASAE S431. Originally issued in 1955 and reaffirmed as recently as 1993, this surface vehicle standard played a…
The SAE J708 standard, officially titled “Agricultural Tractor Test Code”, provided a comprehensive framework for performance testing of agricultural tractors. Developed by SAE International and first issued in 1956, the standard was last revised in 1999 and eventually cancelled in…
SAE J711-2009, titled “Tire Selection Tables for Agricultural Tractors of Future Design,” was a recommended practice from SAE International that provided guidelines for selecting preferred tire sizes for new agricultural machines. Although the standard was cancelled in August 2009, it…
🛠️ Note: this article focuses on engineering interpretation, not clause-by-clause translation. Purpose and Scope SAE J712-2019 is a recommended practice that defines a selection of disc wheels for industrial and agricultural use with a primary goal of maximizing interchangeability. By…
This article provides an overview of SAE J703-2015, a recommended practice that establishes requirements for liquid fuel systems in trucks and truck tractors. It covers construction, installation, safety features, and testing, aligning with Federal Motor Carrier Safety Regulations (FMCSR) while…
SAE J706-2017 is a mature standard that defines rating and specification requirements for new winches designed for intermittent pulls and lifts. It applies to winches driven by any manufacturer-recommended power source and covers everything from safety brake systems to published…
SAE J700-2020 establishes dimensional and flatness requirements for upper coupler kingpins used in commercial trailers and semitrailers in the unladen condition. This standard ensures proper coupling between the trailer and fifth wheel, promoting safety and durability. The key specifications include…
This SAE Information Report specifies dimensional standards for the interchange coupling between truck tractors and semitrailers. Developed jointly by the Automobile Manufacturers Association, American Trucking Association, and Truck Trailer Manufacturers Association, the standard aims to achieve equipment interchangeability while complying…
🛠️ Standard Stabilized SAE J702-2013 has been declared “Stabilized” by the SAE Truck and Bus Brake Supply and Control Components Committee. This indicates the technology and recommended practices are mature and not expected to change in the foreseeable future. Users…
SAE J694‑2021 is the latest revision of a long‑standing recommended practice that defines dimensions and tolerances for the interface between disc wheels and hubs or drums in truck and bus applications. Updated in April 2021, it adds guidance on two‑piece…