Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J1377 was a recommended practice that defined specifications for a rotor mounted on a vehicle transmission to generate a speed signal. First issued in 1984, it provided guidance on rotor geometry, tooth count, and mounting interfaces to ensure consistentā¦
SAE J174M provided a standardized test procedure for determining torque-tension relationships of non-prevailing torque type steel threaded fasteners with metric threads from 6 mm to 24 mm. Although cancelled and superseded by ISO 16047 in 2017, understanding this standard isā¦
Ensuring correct clamping load in bolted joints is critical for assembly integrity. SAE J1701-2017 provides advisory guidance on the torque-tension relationship for inch series threaded fasteners. This Information Report outlines the variables that affect the correlation between applied torque andā¦
SAE J2512-2019 is a stabilized recommended practice that establishes standardized guidelines for rating towing and recovery equipment. Its primary purpose is to ensure consistency and safety across the industry by defining rating methods for equipment such as tow slings, truckā¦
The Token Slot Network (TSN) protocol, developed by General Motors in the early 1990s (SAE J2106), addresses the need for reliable, deterministic communication in distributed automotive control systems. Unlike contention-based protocols such as SAE J1850 or CAN, TSN guarantees boundedā¦
Understanding SAE J2662 and Its Scope SAE J2662 is a recommended practice intended to serve as a reference for the amount of torque that a power take-off (PTO) can induce on the transmission mounting pad. It applies to six-bolt, eight-bolt,ā¦
Articulated wheel loaders rely on precise tire matching to maintain performance, stability, and component longevity. SAE J2204, revised in November 2019, provides clear guidelines for acceptable differences in tire outside circumference and diameter. This article summarizes the key requirements, measurementā¦
SAE J1214, though cancelled in 2014, remains a foundational reference for ensuring adequate tire-to-body clearance on recreational vehicles. This article summarizes its key recommendations and procedures to help designers and engineers avoid common clearance mistakes. 1. Basic Clearance Requirements Theā¦
The SAE J321-2008 standard specifies minimum protection zones and structural requirements for tire guards on pneumatic-tired earthmoving haulage machines such as dumpers and tractor-scrapers operating at speeds exceeding 25 km Though officially cancelled and superseded by ISO 3457, its criteriaā¦
🛠️ Accurate tire models are essential for predicting spindle loads in road load simulations, but model validation is a critical step that must follow a standardized process. SAE J2812-2023 provides a recommended practice for assessing the dynamic behavior of tireā¦