Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Ultrasonic inspection is a versatile nondestructive testing method applicable to most solid materials, metallic or nonmetallic. As detailed in SAE J428-2018, this technique uses high-frequency sound waves to detect surface and internal discontinuities such as cracks, inclusions, voids, and lackā¦
The latest revision of SAE J3045, published in February 2025, brings important clarifications and technical refinements to the test procedure and minimum performance requirements for lane departure warning systems (LDWS) on highway trucks and buses exceeding 4546 kg (10,000 lb)ā¦
SAE J1108-2006 was established to provide direction for designing vehicle identification numbers (VINs) for trucks and truck tractors. Although cancelled in 2006 and its content incorporated into SAE J272, this standard remains a reference for understanding VIN structure and bestā¦
Two-blocking—contact between the lower load block and the upper block or boom point—can lead to catastrophic equipment failure and serious injuries. SAE J1305-2022 establishes minimum performance requirements for devices that signal, limit, or prevent such events. This article covers theā¦
Reliable power delivery to trailer antilock brake systems (ABS) and stop lamps is critical for safety and compliance. SAE J2247-2024, reaffirmed in January 2024, defines the minimum electrical power output requirement at the primary SAE J560 tractor-trailer interface connector. Thisā¦
Overview of SAE J187-2009 SAE J187-2009 was a recommended practice that provided guidelines for the design and installation of Vehicle Identification Numbers (VIN) on trucks and truck-tractors. While it was cancelled in October 2009 and superseded by U.S. federal regulationā¦
SAE J2496 is a recommended practice that specifies cabling requirements for Transport Area Networks (TAN) in heavy-duty vehicles such as trucks and buses. This article provides an overview of the standard, key technical specifications, installation best practices, and common pitfalls.ā¦
SAE J1522-2024, reaffirmed in December 2024, provides engineers with a standardized method to define a 95th percentile truck driver stomach contour in side view for vehicles with horizontally adjustable seats. The contour is a single circular arc (radius 157.5 mm)ā¦
Standardized nomenclature is essential for consistent vehicle identification across manufacturers, regulators, and service networks. SAE J1229-2009 provided uniform definitions for trucks, multipurpose passenger vehicles, manufacturer types, and classification hierarchies. Although cancelled in October 2009 and superseded by U.S. federal regulationsā¦
SAE J3300/2-2020 establishes a recommended practice for certifying the driving skills of professional drivers operating automobiles and light trucks with trailers. Developed with input from OEMs, suppliers, and test facilities, this standard aims to harmonize driver skill assessment across theā¦