Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope, Application, and Thickness Requirements ASTM D2220-21 covers a thermoplastic insulation made from poly(vinyl chloride) (PVC) or copolymers of vinyl chloride and vinyl acetate. It is recommended for use in power and control circuits where the conductor temperature doesā¦
ASTM D2221 – 01 (Reapproved 2021) provides a standardized methodology for evaluating the creep and permanent set characteristics of package cushioning materials. Applicable to bulk, sheet, and molded materials, this test method simulates the static compressive loading experienced by cushioningā¦
The ASTM D2218-67 (Reapproved 2019) specification establishes the standard requirements for Molybdate Orange pigments used in paints and coatings. This article details the critical compliance areas including chemical composition, sampling protocols, and performance testing criteria. 📐 Specification Scope and Chemicalā¦
The ASTM D2219-21 standard defines the specifications for poly(vinyl chloride) (PVC) insulation used in wire and cable applications, optimized for 60 °C operation. This insulation is suitable for wet or dry locations with a maximum voltage rating of 600 Vā¦
⚙️ Purpose and Scope of ASTM D2216-19 These test methods establish the standard laboratory procedure for determining the water (moisture) content of soil, rock, and similar materials by mass. The core principle is that the reduction in mass observed duringā¦
📜 Scope and Significance of Wet Preparation This standard practice covers the wet preparation of soil samples as received from the field for particle-size analysis and determination of soil constants. Procedure A is used when coarse-grained particles are soft andā¦
📐 Specimen Geometry and Conditioning The standard test method D2213-00 (Reapproved 2024) specifically addresses the compressibility of sole leather. It is crucial to note that this method does not apply to wet blue leather. The test specimen must be cutā¦
ASTM D2214 – 02 provides a standardized transient procedure for estimating the thermal conductivity of leather and other low-conductivity materials using the Cenco-Fitch apparatus. This test method is essential for evaluating the insulating properties of materials used in footwear construction,ā¦
The ASTM D2211-00 (Reapproved 2021) standard specifies a test method for measuring the elongation or stretch of leather under tensile load. Applicable to all leather types except wet blue, this method is essential for development, quality control, and specification compliance.ā¦
ASTM D2212-00 (Reapproved 2021) establishes a standardized procedure for evaluating the slit tear resistance of light leathers, including those used in shoe uppers, gloves, and upholstery. By measuring the load required to tear the cross-sectional thickness of the leather atā¦