Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D2310-06 (Reapproved 2012) provides a standardized classification system for machine-made “fiberglass” (glass-fiber-reinforced thermosetting-resin) pressure pipe. This standard covers both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP). Classification is based on the method of manufacture, materials, andā¦
🔬 Scope and Method Summary ASTM D2318-20 covers the determination of quinoline-insoluble matter (QI) in tar and pitch. This test method is strictly empirical, requiring absolute adherence to every procedural detail to ensure reliable and reproducible results. In practice, aā¦
ASTM D2306-00 provides a standard test method for determining the relative distribution of individual C8 aromatic hydrocarbon isomers in various xylene products using gas chromatography. This method is vital for quality control and compliance in the petrochemical industry. 📐 Scopeā¦
🧪 Scope and Application ASTM D2307-21 provides a standardized method for determining the thermal endurance of film-insulated round magnet wire when exposed to air at atmospheric pressure. The standard explicitly excludes magnet wire with fibrous insulation, such as cotton orā¦
📐 Scope and Materials Selection ASTM D2304-23 provides standardized procedures for evaluating the thermal endurance of rigid electrical insulating materials (EIM). This method assesses the ability of materials such as supports, spacers, voltage barriers, coil forms, terminal boards, and circuitā¦
🧪 Scope and Significance of ASTM D2305-18 ASTM D2305-18 evaluates homogeneous organic polymer films for electrical insulation. Scoped to films ≤ 2.4 mm (95 mils), these methods are optimized for single-layer materials and are not strictly applicable to coated filmsā¦
📐 Specification Overview and Classification This specification covers electrical insulating tape consisting of a flexible backing made from vinyl chloride plastic coated on one side with a pressure-sensitive adhesive. The tape is classified into two types based on nominal thickness:ā¦
The ASTM D2303-20 standard specifies test methods for evaluating tracking and erosion resistance of insulating materials using a liquid-contaminant, inclined-plane test. It is critical for materials in high-voltage insulation applications. 📐 Test Methods and Terminology This standard includes two trackingā¦
📐 Scope and Material Requirements ASTM D2296-01 (Reapproved 2006) establishes the property limits for electrical insulating polybutene oil used in capacitors to ensure consistent quality and grade continuity. The standard mandates that no changes in polybutene oil type be madeā¦
📐 Scope and Test Principle of D2300-08 (Modified Pirelli Method) This standard, officially designated as D2300-08 (Reapproved 2017), defines the test procedure for measuring the rate at which gas is evolved or absorbed by electrical insulating liquids. The measurement isā¦