Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Applicability of D2462-22 This standard test method is specifically designed for determining the amount of moisture present in various wool forms through azeotropic distillation with toluene. It is directly applicable to grease wool, scoured wool, carded wool,…
ASTM D2457-21 defines standardized procedures for the quantitative measurement of specular gloss in plastic films and solid plastics. This test method applies to both opaque and transparent materials, providing a reliable metric for surface appearance. The standard specifies four distinct…
ASTM Designation D 246 – 04a, also standardized as AASHTO T 62, establishes a controlled laboratory procedure for the distillation of creosote and creosote-coal tar solutions. This test method is essential for analyzing the boiling range of these wood preservatives,…
📐 Scope and Significance of Carboxylic Acid Identification This test method, designated ASTM D2455-89 (Reapproved 1996), provides a standardized procedure for the qualitative determination of carboxylic acids present in alkyd resins and resin-modified alkyds. While applicable to polyesters, analysts should…
📐 Scope and Principles of the Test ASTM D2456-91 (Reapproved 1997) provides a standardized approach for the qualitative identification of polyhydric alcohols (polyols) within alkyd resins and resin-modified alkyds. The methodology is also applicable to polyesters, however, analysts should be…
📐 Scope and Specimen Types This standard, designated D2453-15 (Reapproved 2020), provides a laboratory procedure for determining the shrinkage and tenacity of oil- and resin-base caulking compounds. It is applicable to both gun (Type I) and knife (Type II) grades.…
📖 Overview and Significance of Overbaking ASTM D2454-23 provides a standardized practice for determining the time-temperature effect of overbaking on the physical and chemical properties of organic coatings. Overbaking, formally defined in Section 3.1.1 of the standard, is an exposure…
ASTM D2452-15 (Reapproved 2019) establishes a laboratory procedure for determining the extrusion rate of oil- and resin-base caulking compounds. This rate directly correlates with the “gunnability” of a compound in field applications, making this standard a key tool for manufacturers…
📜 Scope and Significance of D245-22 ASTM D245-22 constitutes the definitive standard practice for translating clear wood property values into allowable design stresses for visually graded structural lumber. Its primary framework, as described in Section 1.1, begins with property values…
ASTM D2451-99 is a standardized laboratory procedure used to determine the degree of set of oil-based and resin-based face glazing and bedding compounds when applied to metal sash windows. Degree of set refers to the extent of cure or hardening…