Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D2420-23 is a standard test method for detecting hydrogen sulfide (H₂S) in liquefied petroleum (LP) gases using the lead acetate method. This test is crucial for ensuring the quality and safety of LP gases by detecting even low concentrations…
🔬 Purpose and Scope of the Sand Equivalent Test ASTM D2419-22 serves as a rapid field correlation test designed to evaluate the relative proportions of clay-size or plastic fines and dust in granular soils and fine aggregates. The specimen under…
📐 Scope and Significance This standard test method, designated ASTM D2415-20, specifically covers the determination of the ash content in coal tar and pitch. The resulting ash value directly represents the total inorganic matter present within the sample. The standard…
ASTM D2416-20 establishes a test method for determining the coking value of tar and pitch materials using a modified Conradson apparatus. Specifically designed for samples with an ash content not exceeding 0.5% (as detailed in Test Method D2415), this standard…
📐 Scope and Specimen Geometry Requirements ASTM D2413-16 (Reapproved 2022) establishes a standardized practice for the preparation of insulating paper and board impregnated with a liquid dielectric. As defined in Section 1.1, the term “paper” is inclusive of “board” throughout…
📐 Scope and Referenced Documents ASTM D2414-23a, issued under the fixed designation D2414, covers the standard test method for determining the Oil Absorption Number (OAN) of carbon black. This test is under the jurisdiction of ASTM Committee D24 on Carbon…
Phthalic anhydride is a versatile intermediate used extensively in the production of plasticizers, alkyd resins, and polyester resins. ASTM D2403 – 96 (Reapproved 2003), formally titled Standard Specification for Refined Phthalic Anhydride-1308, provides the definitive quality benchmark for this critical…
📐 Scope and Materials ASTM D2412-21 covers the determination of load-deflection characteristics of plastic pipe under parallel-plate loading. This test method specifically applies to thermoplastic resin pipe, reinforced thermosetting resin pipe (RTRP), and reinforced polymer mortar pipe (RPMP). The primary…
This specification governs the requirements for black and yellow varnished woven cloth and tape used primarily as electrical insulation. The base fabric combines poly(ethylene terephthalate) (PET) yarns in the warp direction with glass yarns in the filler direction, coated with…
The ASTM D2402-07 (Reapproved 2018) standard outlines a centrifuge procedure to measure the water retention of textile fibers. This method quantifies the water remaining in thoroughly wetted fibers after mechanical removal via centrifugal force. 📐 Specimen Geometry and Types This…