Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The ASTM D2477-07 (Reapproved 2020) standard establishes a rigorous test method for evaluating the dielectric breakdown voltage and dielectric strength of insulating gases. These gases are commonly used as the primary dielectric medium in high-voltage apparatus such as transformers, circuitā¦
📐 Specifications and Scope This specification, D2472−15 (Reapproved 2023), applies to sulfur hexafluoride (SF₆) for use as an electrical insulating gas. The standard is intended for gas as purchased, but the test methods may be useful for evaluating in-service gas.ā¦
ASTM D2475-22 establishes specifications for felt rolls and sheets used in mechanical applications. It outlines dimensional tolerances, mass requirements, and references related standards to ensure quality and consistency in felt manufacturing. 📐 Scope and Referenced Documents This specification covers allā¦
📐 Scope and Material Requirements (Section 1) ASTM Designation D2468–96a covers the standard specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40. This specification establishes the necessary requirements for materials, workmanship, dimensions, and burst pressure to ensure the fittings areā¦
📐 Specimen Geometry and Types The test method requires sample containers that maintain a cross-sectional area representative of the application. Recommended containers include an aluminum foil dish approximately 7 cm (2.75 in) in diameter and 1.4 cm (0.56 in) deep,ā¦
📐 Scope and Materials ASTM D2466-24 covers poly(vinyl chloride) (PVC) Schedule 40 pipe fittings for pressurized liquid distribution. Fittings must be manufactured from rigid PVC compounds conforming to ASTM D1784, ensuring consistent quality and performance. Workmanship standards require fittings toā¦
ASTM D2467-24 is the latest revision of the standard specification governing Poly(Vinyl Chloride) (PVC) Schedule 80 plastic pipe fittings. This document establishes the requirements for materials, workmanship, dimensions, and burst pressure to ensure reliable performance in pressurized liquid systems. Thisā¦
🧪 Scope and Purpose of D2463-23 The ASTM D2463-23 standard provides a comprehensive method for evaluating the drop impact resistance of water-filled, blow-molded thermoplastic containers. This test assesses the combined effects of material selection, manufacturing conditions, and container design onā¦
📜 Scope and Material Requirements for PVC Threaded Fittings ASTM D2464‑23 is the standard specification for threaded Poly(Vinyl Chloride) (PVC) Schedule 80 pipe fittings. This specification, issued under the fixed designation D2464, defines strict requirements for materials, workmanship, dimensions, andā¦
🧪 Overview and Scope of Standard D2460-07 This standard test method specifically covers the separation and measurement of dissolved, alpha-particle-emitting radium isotopes in water. The primary isotopes of concern governed by this test method are ²²³Ra, ²²⁴Ra, and ²²⁶Ra. Theā¦