Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🌐 Scope and Significance of Color Measurement ASTM D3157‑05 (Reapproved 2020) provides a standardized procedure for classifying the color of raw natural rubber using a defined color scale. The method relies on the visual comparison of a molded test specimenā¦
📜 Scope and Application This specification covers molding and extrusion materials of modified ETFE fluoropolymer. The ETFE resin is a copolymer of ethylene and tetrafluoroethylene, with modified grades containing no more than 5 mole % of other fluoromonomers. It isā¦
ASTM D3155-11, formally titled “Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures,” is a standard procedure used extensively in geotechnical engineering and construction quality control. The method provides a reliable means to quantify the percentage of lime presentā¦
📐 Scope, Significance, and Application of D3156-96 ASTM D3156-96 (Reapproved 2021), titled “Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)”, provides a standardized framework for the detection and identification of these critical chemical agents in raw rubberā¦
The ASTM D3154-14 (Reapproved 2023) standard, developed by Committee D22 on Air Quality, describes the standard test method for measuring average velocity in ducts using the Pitot tube method. This method is technically complex but is considered the most accurateā¦
🔬 Scope and Summary of Test Method This test method, designated ASTM D3152 – 72 (Reapproved 2000), covers the determination of capillary-moisture properties of fine-textured soils. It specifically utilizes a pressure-membrane apparatus to establish the moisture content vs. moisture tensionā¦
🧪 Scope and Key Terminology for D3153-23 This test method covers the determination of the effects of applying a water-emulsion floor polish over a dried coating of the same polish. It is specifically designed for laboratory bench panel testing, althoughā¦
📐 Scope and Classification ASTM D3150-21 specifies the requirements for flexible, crosslinked and noncrosslinked poly(vinyl chloride) (PVC) heat-shrinkable tubing used for electrical insulation. The tubing is supplied in an expanded form and shrinks to its extruded diameter when exposed toā¦
The ASTM D 3151 – 88 (Reapproved 1998) standard, formally titled the Standard Test Method for Thermal Failure of Solid Electrical Insulating Materials Under Electric Stress, specifically addresses the phenomenon of thermal dielectric runaway at commercial power frequencies. It isā¦
ASTM D3149-06 (Reapproved 2013) is the definitive specification for crosslinked polyolefin heat-shrinkable tubing used for electrical insulation. The material is supplied in an expanded form and shrinks precisely to its extruded diameter when heat is applied. This standard serves asā¦