admin

ASTM Standard D3617/D3617M – 17 (Reapproved 2022) provides a standardized guide for removing and analyzing specimens from built-up bituminous roof systems during the application process. The primary goal of this practice is to determine the approximate quantities of the roof…

ASTM D3618−05 (Reapproved 2022) specifies a qualitative screening test to determine whether the solids in a paint contain more than 0.5% lead by weight. This method is widely used in the coatings industry for rapid compliance checks and quality assurance,…

📐 Scope & Key Apparatus This test method, designated D3616 – 95 (2024), specifies procedures for determining the Dilute Solution Viscosity (DSV), gel characteristics, and swelling index of raw, non-oil-extended, and non-pigmented SBR (Styrene-Butadiene Rubber) and NBR (Acrylonitrile-Butadiene Rubber) polymers.…

ASTM D3613–98 establishes the standard practice for sampling electrical insulating liquids with a viscosity less than 650 cSt at 40°C. Proper sampling is essential for accurate dissolved gas analysis (DGA) and water content determination, providing critical early indications of abnormal…

🏛️ Scope and Organizational Framework ASTM D3614‑07 (Reapproved 2021) establishes essential criteria for the selection, evaluation, operation, and control of laboratory organisations engaged in the sampling and analysis of environmental atmospheres. The standard covers ambient air, workspace environments, source emissions,…

This practice, designated ASTM D3611 – 06 (Reapproved 2019), provides a standardized environment for the accelerated aging of finished pressure-sensitive tape material. It is intended for use in conjunction with subsequent appearance or physical property tests, such as Test Methods…

🧪 Scope and Applicability This standard, designated D3612 −02 (Reapproved 2017), specifies three procedures for the extraction and gas chromatographic measurement of dissolved gases in electrical insulating oils. It is applicable to oils having a viscosity of 20 cSt (100…

ASTM D3609-22 establishes the standard practice for utilizing permeation tubes to dynamically calibrate instruments and analyzers used in measuring gas and vapor concentrations in atmospheric environments. As outlined in Section 1, this method is ideal for reactive and unstable substances,…

📐 Scope and Application of D3610-22 ASTM D3610 – 22 is a standard test method specifically designed for the potentiometric determination of total cobalt in fresh alumina-base cobalt-molybdenum catalysts. The cobalt content is expressed as the oxide (Co₃O₄) and the…

📋 Scope and Significance Overview The ASTM D3608-19 standard specifies the manual determination of combined nitrogen dioxide (NO₂) and nitric oxide (NO), expressed as total NOx, in the atmosphere using the Griess-Saltzman reaction. This test method covers a measurement range…