Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Applicability This test method, designated D3606-24a, provides a standardized gas chromatographic approach for quantifying benzene and toluene in finished motor and aviation spark ignition fuels. It encompasses two distinct procedures: Procedure A utilizing capillary column gas chromatography…
ASTM D3607-08 (Reapproved 2016) provides a standardized procedure for the removal of volatile contaminants—specifically gasoline and water—from used engine oils prior to further analysis. This stripping process is essential for accurate subsequent testing of the oil’s mechanical and oxidative properties,…
🔬 Purpose and Significance of D3603-20 ASTM D3603-20 evaluates the ability of steam turbine oils to prevent rusting on ferrous surfaces when water mixes with the oil. This test method is more discriminating than Test Method D665 (Procedure A) because…
This article provides a technical overview of ASTM D3605-22, the standard test method for determining trace metals in gas turbine fuels using atomic absorption (AA) and flame emission spectroscopy (FES). The method specifically targets the analysis of sodium, lead, calcium,…
ASTM D3601 – 88 (Reapproved 2007) specifies the Bottle Test for evaluating foam formation in low-viscosity aqueous liquids, such as water-based metalworking coolants. The method is designed for fluids with viscosity less than 3 cSt at 40°C and measures the…
The ASTM D36/D36M-14 (Reapproved 2020) test method, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), specifies the procedure for determining the temperature at which bituminous materials transition to a specific state of fluidity under standardized conditions. This method…
📜 Scope and Classification of Shellac Varnishes This specification, ASTM D360-12 (Reapproved 2019), defines the requirements for shellac varnish, which is a solution or “cut” of a specific dry lac resin in specially denatured alcohol. The primary solvent approved is…
📐 Scope and Applicability ASTM D3597-02 (Reapproved 2024) is a standard performance specification that establishes the performance requirements for plain, tufted, or flocked woven upholstery fabrics used in the manufacture of new indoor furniture. These requirements apply to both the…
🧪 Overview and Scope of D3598-89 The Standard Test Method D3598-89 (Reapproved 2024) specifies the enzymatic determination of citrate in both liquid and solid synthetic detergents. This method relies on the high specificity of the citrate lyase enzyme system. The…
📋 Classification and Material Types ASTM D3595–14 (Reapproved 2019) defines the standard specification for extruded plastic sheet and film manufactured from Polychlorotrifluoroethylene (PCTFE). The standard applies to materials from 0.015 to 0.25 mm in thickness. Section 4.1 defines four distinct…