Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🎯 Scope and Summary of the Test Method This test method, designated ASTM D3725-78 (Reapproved 1998), covers the semiquantitative determination by gas-liquid chromatography (GLC) of herring and menhaden fish oil when present in small quantities in other drying oils andā¦
📋 Scope, Referenced Documents, and Key Test Methods ASTM D3728-08 (Reapproved 2012) specifically covers the requirements for 99% grade 2-Ethoxyethyl Acetate, a solvent widely used in paints, coatings, and chemical intermediate applications. The values stated in SI units are regardedā¦
🧪 Scope and Significance of D3723-22 This standard test method outlines a reliable procedure for determining the pigment content of water-emulsion paints using low-temperature ashing. It is ideally suited for coatings where the pigment load consists of materials thermally stableā¦
🧪 Composition and Chemical Requirements Standard D3724-01 (Reapproved 2019) specifies the requirements for synthetic brown iron oxide pigments used in paints and coatings. The pigment must be a manufactured iron oxide or a blend, produced via precipitation of iron salts,ā¦
📐 Scope and Composition Requirements ASTM D3721 – 05 (Reapproved 2019) specifies the requirements for synthetic red iron oxide pigment intended for use in paints and coatings. This standard is directly under the jurisdiction of ASTM Committee D01. The pigmentā¦
📜 Scope and Specifications This specification covers dry and wet ground naturally occurring iron oxide, dry and wet ground calcined naturally occurring iron oxide, and mixtures of these with synthetic iron oxides. These pigments are suitable for use in paints,ā¦
📋 Classification and Types of Flexible Treated Sleeving ASTM D372-00 defines seven types of flexible treated sleeving for electrical insulation based on base fiber material and temperature index. These tubular products are made from woven textile fibers impregnated or coatedā¦
🧪 Scope and Summary of Test Method ASTM D3720‑90 (Reapproved 2019) establishes a standardized X‑ray diffraction (XRD) procedure for determining the ratio of anatase to rutile phases in titanium dioxide pigments. The method is applicable to single pigments, pigment mixtures,ā¦
ASTM D3718-85a (Reapproved 2022) specifies a standard test method for determining low concentrations of chromium in paint by atomic absorption spectroscopy. This method is applicable for chromium content in the range of 0.005% to 1.0% in the solids of liquidā¦
ASTM D3719-00 establishes a standardized instrumental method for quantifying the degree of dirt collection on exposed coated exterior panels. The protocol relies on measuring color changes—specifically the reduction in lightness (L*) over a defined exposure period. This article provides aā¦