Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Application This performance specification covers women’s and girls’ woven rainwear and all-purpose water-repellent coat outer fabrics composed of any textile fiber or mixture of textile fibers. It is not applicable to woven fabrics used for linings andā¦
ASTM D3777 – 97 (Reapproved 2002) provides a comprehensive framework for drafting rigorous and technically sound specifications for textile products. The scope (Section 1.1) explicitly covers general methods for specifying textile product characteristics that may be measured or counted. Thisā¦
🧥 Scope and Key Definitions ASTM D3778-95a establishes performance criteria for woven outer fabrics used in women’s and girls’ dry-cleanable dress coats. Under the jurisdiction of ASTM Committee D13.56, this specification covers any textile fiber or mixture of fibers intendedā¦
🧵 Overview and Scope of D3775 ASTM D3775 – 17 (Reapproved 2023) provides a standardized procedure for determining the end (warp) and pick (filling) count of woven fabrics. This test method is applicable to all types of woven fabric constructionsā¦
ASTM D3776/D3776M-20 provides standardized test methods for measuring fabric mass per unit area, commonly referred to as fabric weight. These methods are applicable to most fabrics and include four approved options to accommodate various fabric forms and testing scenarios. 📐ā¦
📏 Overview and Scope of D3773/D3773M ASTM D3773/D3773M provides standardized test methods for determining the length of woven fabric. The standard is applicable to full rolls or bolts of material and is essential for commercial transactions and quality assurance. Itā¦
📐 Scope, Terminology, and Significance The ASTM D3774-18 standard, reapproved in 2024, provides a definitive test method for measuring the width of woven and knitted textile fabrics. Under the jurisdiction of Subcommittee D13.60, the method specifically addresses the measurement ofā¦
📜 Scope and Product Classification This standard, designated ASTM D3772-15 (Reapproved 2021), establishes a uniform specification for industrial finger cots manufactured from either natural rubber latex (Type I) or synthetic nitrile polymer (Type II). The core objective is to ensureā¦
ASTM D3770 – 91 defines the minimum physical properties and performance classification for High-Resilience (HR) and Combustion Modified High-Resilience (CMHR) flexible polyurethane foams. Widely adopted in furniture, bedding, and transportation seating, this standard provides the framework for ensuring quality, durability,ā¦
ASTM D3771-15 (Reapproved 2022) specifies the general material and design requirements for rubber seals used in concentrating solar collectors (CSP). The standard harmonizes critical test methods, ensuring seals can endure extreme thermal cycling, UV radiation, and mechanical stress. It addressesā¦