Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Referenced Documents This standard, designated D3787 – 16 (Reapproved 2020), specifically covers the measurement of bursting strength for textiles and garments that exhibit a high degree of ultimate elongation using a Constant-Rate-of-Traverse (CRT) ball burst strength tester.…
ASTM D3790-24 defines the standard procedure for determining the volatile matter (moisture) content in all types of leather. This determination is critical for reporting the results of other chemical tests on a moisture-free basis. 📐 Scope, Significance, and Required Apparatus…
📜 Scope and Material Applicability ASTM D3785-20 defines the standard performance specification for woven necktie and scarf fabrics. It applies to fabrics made from any textile fiber or mixture of textile fibers (Section 1.1). The requirements apply to both the…
📐 Scope and Key Terminology This test method (D3786/D3786M −18 (Reapproved 2023)) describes the measurement of the bursting strength of textile fabrics using a hydraulic or pneumatic diaphragm bursting tester. It is generally applicable to a wide variety of textile…
ASTM D3783-02 establishes the minimum performance criteria for woven flat lining fabrics intended for use in men’s and boys’ apparel. This specification covers linings composed of any textile fiber or fiber blend, providing manufacturers, retailers, and quality assurance labs with…
The ASTM D3784-02 standard, issued under the fixed designation D 3784, establishes the required performance characteristics for men’s and boys’ woven bathrobe and dressing gown fabrics. Under the jurisdiction of ASTM Committee D13 on Textiles (Subcommittee D13.61 on Apparel), this…
🔍 Scope and Terminology ASTM D3781-02 specifies performance requirements for men’s and boys’ knitted rainwear and all-purpose water-repellent coat fabrics. It covers fabrics made from any textile fiber or mixture, but it is not applicable to interlinings. The standard defines…
📜 Scope and Application ASTM D3782-22 establishes the performance criteria for men’s and boys’ knitted dress suit fabrics and knitted fabrics intended for sportswear jackets, slacks, and trousers. This specification applies to fabrics composed of any textile fiber or blend,…
📐 Specimen Geometry and Types The test methods under D378-24 require precise specimen preparation from the conveyor belt. For heavy duty belts (tension ≥160 PIW), specimens are taken from both the carcass and cover layers. Light duty belts (
📜 Scope and Document Structure of D3780-22 ASTM D3780-22, titled Standard Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics, establishes the minimum performance requirements for these garment categories. Approved on…