Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Scope and Structure of D3288/D3288M−20 ASTM D3288/D3288M−20, developed by Committee D09 on Electrical and Electronic Insulating Materials (Subcommittee D09.12), provides a standardized protocol for testing liquid enamel coatings specifically designed for film-insulated magnet wire. The standard integrates seven distinct…
ASTM D3289-17 (Reapproved 2022) specifies the Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method). This method determines the density of semi-solid and solid asphalt materials by weighing in air and in water. The values…
📐 Apparatus and Specimen Geometry The Cobb test apparatus includes a metal ring with an inside diameter of 11.28 ± 0.02 cm (100 cm² area), 2.5 cm high, and about 0.6 cm thick. This ring is clamped to a base…
🧪 Scope and Classification ASTM D3283-98 (Reapproved 2020) defines the material standard for gaseous air used as an electrical insulator. This specification applies exclusively to Type I, gaseous air, encompassing both processed natural atmospheric air and synthetic blends created by…
ASTM D3284-05 (Reapproved 2019) specifies a field practice for detecting and estimating combustible gases in the gas blanket above the oil or in gas detector relays of transformers using portable instruments. This practice is applicable only to transformers utilizing mineral…
⚙️ Standard Scope and Summary of Test Methods This standard, designated ASTM D3280 – 85 (Reapproved 2020), covers standardized procedures for the chemical analysis of white zinc pigments. These methodologies are critical for quality assurance in the paint and coatings…
🎯 Purpose and Scope of D3282-24 ASTM D3282-24 establishes a standard practice for classifying mineral and organomineral soils into seven distinct groups for highway construction purposes. The classification is derived from laboratory determination of particle-size distribution, Liquid Limit, and Plasticity…
🔍 Introduction to ASTM D3278-21 ASTM D3278-21 specifies standard test methods for determining the flash point of liquids using a small scale closed-cup apparatus. These methods are designed for paints, enamels, lacquers, varnishes, solvents, and related products with flash points…
📖 Scope and Summary of the Test Method ASTM D3279-19 provides a standardized gravimetric procedure for determining the mass percentage of asphaltenes in various petroleum products. Asphaltenes are specifically defined by this method as the hydrocarbon components that are insoluble…
ASTM D3276-21 is a standard guide designed to assist painting inspectors in efficiently executing their responsibilities for metal substrates. It encompasses key elements from surface preparation through coatings application to final approval, applicable both in field and shop environments. This…