Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Method Overview and Scope ASTM D6481-24 is a standardized test method for the quantitative determination of phosphorus, sulfur, calcium, and zinc in unused lubricating oils using Energy Dispersive X-ray Fluorescence (EDXRF) spectroscopy. It is specifically limited to spectrometers employing…
🟦 Specimen Requirements and Load Orientation ASTM D648-18 is specifically designed for molded and sheet materials that are rigid or semirigid at normal temperature. A critical starting point is the material thickness, which must be 3 mm (1/8 in.) or…
This article provides an overview of ASTM D6480-19, a standard test method for wipe sampling of surfaces and analysis for asbestos structure number surface loading using transmission electron microscopy (TEM). The method is designed to identify asbestos in samples collected…
ASTM D6479 – 15 (Reapproved 2020) defines the standard test method for evaluating the edgecomb resistance of woven fabrics used in inflatable restraints. This property is critical for airbag material design, as it quantifies the force required to cause rupture…
ASTM D6478 – 10 (Reapproved 2019) is a standardized test method under the jurisdiction of ASTM Committee D13 on Textiles. It provides a procedure for determining the specific packability of fabrics used in inflatable restraints (airbags). This index is critical…
ASTM D6476 – 12 (Reapproved 2021) establishes a standardized test method for evaluating the high-pressure dynamic air permeability of uncoated fabrics used in inflatable restraint systems (airbags). Unlike steady-state methods, this test simulates the transient conditions of an airbag deployment.…
ASTM D6477 – 23, titled Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics, is the definitive lexical standard for Subcommittee D13.19 on Industrial Fibers and Metallic Reinforcements. This compilation standard provides unambiguous definitions for the…
📐 Introduction and Scope ASTM D6475-17, under the jurisdiction of ASTM Committee D18 on Soil and Rock, is a standard test method for measuring the mass per unit area of erosion control blankets (ECBs). This method serves as an index…
🧪 Scope and Applicability of D6474-20 This standard test method, designated D6474-20, outlines the procedure for determining the molecular weight distribution (MWD) and average molecular weights (such as Mn, Mw, and Mz) of polyolefins using High Temperature Gel Permeation Chromatography…
The ASTM D6472-10 standard sets forth requirements for recycled ethylene glycol and propylene glycol base engine coolant concentrates for use in automobiles and light-duty vehicles. These concentrates are produced from recycled aqueous coolants and must meet specific criteria to ensure…