Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4980-89 (Reapproved 2003) establishes two standardized screening procedures for determining the pH of hazardous waste materials. Designed for liquids, sludges, semisolids, and solids, these methods serve as a critical preliminary step in waste characterization, enabling rapid assessment of acidityā¦
🧪 Scope and Application These test methods are applicable to the screening of reactive sulfides in waste materials including liquids, sludges, semisolids, and solids. They are designed as a preliminary test to complement more sophisticated quantitative analytical techniques and areā¦
🧪 Overview and Significance This test method, designated as D4977/D4977M-20 (Reapproved 2025), is used to determine the adhesion of granules to mineral-surfaced roofing materials through abrasion. The primary purpose is to assess the quality of granule adhesion to the coatingā¦
📐 Scope and Significance of D4975-14 ASTM D4975-14 provides standardized test methods specifically designed for single-filament steel wires used as components in tire beads for pneumatic tires. By agreement between the purchaser and supplier, these methods can also be appliedā¦
📜 Scope and Application of D4976 ASTM D4976-12a (Reapproved 2020) is a standard specification designed for the identification of polyethylene plastics used in molding and extrusion processes. Rather than dictating material selection for specific end-use applications, this specification provides aā¦
ASTM D4974/D4974M defines a standard test method for measuring the hot air thermal shrinkage of yarns and cords using a thermal shrinkage oven. This method is essential for evaluating the dimensional stability of materials used in tire cords and industrialā¦
🔬 Overview and Scope of D4972−19 The ASTM standard D4972−19 (Reapproved 2024) provides standardized test methods for the measurement of pH in soil materials passing the 2.00 mm (No. 10) sieve. This analysis is critical for determining the degree ofā¦
ASTM D4970/D4970M-22 provides a standardized test method for determining the resistance to pilling and other surface changes in textile fabrics using the Martindale tester. This method is essential for evaluating fabric quality and performance. 📐 Test Method Overview and Scopeā¦
📐 Scope and Terminology ASTM D4971-16 outlines a standard procedure for estimating the in situ modulus of deformation of rock masses using a diametrically loaded borehole jack. This method is intended for use in N size drill holes and isā¦
📐 Scope and Classification This specification, D4969‑17 (Reapproved 2022), covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.) or less. It is intended for electrical, chemical, and mechanical uses. Structuralā¦