Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Purpose of the Standard ASTM D4967 – 21, issued under the fixed designation D4967, is a Standard Guide under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials. It is specifically designed to provide aā¦
📐 Scope and Key Terminology ASTM D4968-19 is a standard practice meant to assist the subcommittees and sections of Committee D20 on Plastics with the process of standards evaluation during the mandatory five-year review established by ASTM. It is designedā¦
📐 Scope, Specimen Considerations, and Units This test method, designated D4966-22, specifically covers the determination of the abrasion resistance of textile fabrics using the Martindale abrasion tester. Under the jurisdiction of ASTM Committee D13 on Textiles and Subcommittee D13.60 onā¦
📐 Scope and Application of the Terminology ASTM D4965 – 96 (Reapproved 2008) provides a uniform, easily understood language for the definitions and descriptions of seams and seam finishes used in home sewing. This terminology serves as a common baseā¦
📐 Scope and Specimen Classification The D4963/D4963M−22 standard defines a primary test method for determining the ignition loss of glass fiber textiles. It establishes a procedure applicable to a wide variety of products. As stated in the scope, this includesā¦
📐 Scope and Field of Application ASTM D4964 – 96 (Reapproved 2020) establishes a standardized methodology for measuring the tension and elongation of elastic fabrics using a Constant-Rate-of-Extension (CRE) type tensile testing machine. The standard applies to both wide andā¦
📐 Scope and Application ASTM D4962-18 standardizes the measurement of radionuclides in water using gamma-ray spectrometry with NaI(Tl) detectors. It applies to nuclides emitting gamma rays with energies greater than 50 keV. For typical systems, activity levels of about 40ā¦
ASTM D4961 – 99 defines standard test methods for determining major organic impurities in refined phenol produced via the cumene (isopropylbenzene) process. These methods are integral to process control and setting specifications for high-purity phenol. The standard employs two distinctā¦
ASTM D4959-24 specifies a rapid method for determining the water content of soil utilizing direct heat sources such as hotplates, stoves, or blowtorches. This standard is designed as a time-saving alternative to Test Methods D2216 when expedited results are neededā¦
📐 Scope and Significance of D4960-20 ASTM D4960-20 describes the instrumental determination of color for thermoplastic pavement marking materials using the CIE Y, x, y color measurement system (Scope, Section 1.1). The standard defines a thermoplastic pavement marking material asā¦