Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D501-03 (Reapproved 2023) is the authoritative standard for the sampling and chemical analysis of inorganic alkaline detergents, developed by ASTM Committee D12. It provides comprehensive procedures for determining the composition, purity, and physical properties of major industrial compounds used…
📜 Scope and Methodology ASTM D5008-22 covers the determination of ethyl methyl pentanol content and purity value of 2-ethylhexanol by gas chromatography. The method is applicable for quality control in solvents and chemical intermediates used in paint and related coatings.…
📐 Scope and Purpose of Transfer Efficiency Testing ASTM D5009-02 (Reapproved 2023) provides a standardized method for evaluating and comparing the transfer efficiency of spray-applied coatings under strictly controlled laboratory conditions. While the method yields excellent intralaboratory reproducibility, interlaboratory precision…
🎯 Scope and Key Terminology ASTM D5007-99 (2024), officially titled Standard Test Method for Wet-to-Dry Hiding Change, establishes a visual procedure for evaluating the alteration in hiding power of an architectural coating as it transitions from a wet to a…
📐 Specimen Preparation and Sieve Requirements The test method outlined in ASTM D5004‑23 requires the calcined petroleum coke specimen to be ground to a particle size smaller than 75 µm, passing through a No. 200 sieve as per ASTM E11. This precise…
📏 Scope and Summary ASTM D5006-24 is a standard test method for measuring the concentration of Diethylene Glycol Monomethyl Ether (DiEGME) in aviation fuels. This method is essential for determining the level of fuel system icing inhibitors (FSII) in fuel,…
📐 Scope and Application of D5003/D5003M ASTM D5003/D5003M — 23 defines the standard procedure for determining the Hardgrove Grindability Index (HGI) of petroleum coke. While the mechanical testing procedure is identical to that of Test Method D409 (used for coal),…
📐 Scope and Applicability ASTM D5002-22 specifies a test method for determining the density, relative density, and API gravity of crude oils using a digital density analyzer. The method is applicable to crude oils that can be handled as liquids…
ASTM D5000-05 defines a standard field practice for monitoring the adsorptive capacity of calcined clay elements used in aviation fuel filtration. By employing a side-stream sensor and the Portable Separometer apparatus (D 3948), operators can reliably determine if the useful…
📐 Scope and Significance of ASTM D5001-23 ASTM D5001-23 is the definitive standard for assessing the wear aspects of the boundary lubrication properties of aviation turbine fuels on rubbing steel surfaces using the Ball-on-Cylinder Lubricity Evaluator (BOCLE). The standard explicitly…