Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🚧 Scope and Application of D5030/D5030M-21 These test methods cover the determination of the in-place density of soil and rock materials by the water replacement method in a test pit. The test involves excavating a pit, lining it, and measuring…
ASTM D5029-98 (Reapproved 2020) describes a standardized reflux extraction technique for determining the water-soluble content of unused granular and powdered activated carbons. The quantity of these soluble materials provides a relative indication of the leachable components that can influence the…
📐 Scope and Summary of Test Method ASTM D5026-23 outlines the use of dynamic mechanical instrumentation for gathering and reporting the viscoelastic properties of thermoplastic and thermosetting resins and composite systems in tension. This standard is designed for specimens with…
The ASTM D5028-17 standard, officially titled “Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis,” provides a definitive methodology for assessing the curing behavior of thermosetting resins used in the pultrusion process. By employing Differential Scanning Calorimetry…
🔥 Standard Overview and Scope ASTM D5025-20a provides a definitive specification for the physical dimensions and operational characteristics of a laboratory burner used as an ignition source in small-scale flammability tests on plastic materials. The standard defines a burner suitable…
ASTM D5024-23 defines the standard methodology for evaluating the dynamic mechanical properties of plastics in compression. It applies to a wide range of materials, including thermoplastic and thermosetting resins, composites, and cellular plastics, using nonresonant forced-vibration techniques. 📐 Specimen Geometry…
ASTM D5022-07 provides specifications for the identification of small-volume containers of drugs intended to be diluted before parenteral administration. The standard addresses container shape, labeling, vial closures, and ampoule markings to ensure safe handling and prevent accidental misuse. 📦 Container…
📐 Specimen Geometry and Types ASTM D5023-23 specifies the use of rectangular bar specimens for dynamic mechanical testing in flexure. These specimens may be molded directly or fabricated by cutting from sheets, plates, or molded shapes to meet the requirements…
📊 Scope and Classification of TECEA Materials This specification, ASTM D 5021 – 00, outlines the requirements for Thermoplastic Elastomer–Chlorinated Ethylene Alloy (TECEA). These materials are suitable for a variety of processing methods, including injection molding, extrusion, blow molding, and…
📜 Scope and Significance This test method, designated D502-89 (Reapproved 2023), covers the determination of the particle size of soaps and other detergents by hand sieving and machine sieving methods. The values stated in SI units are to be regarded…