Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4077-23 defines the comprehensive specification for cumene (isopropylbenzene), a critical chemical intermediate primarily used in the production of phenol and acetone. This standard establishes precise purity requirements and impurity limits under the jurisdiction of Committee D16 on Aromatic, Industrial,…
⚖️ Scope, Significance, and Test Methodology This test method, designated D4073/D4073M −06 (Reapproved 2024), provides a standardized procedure for determining the tensile-tear strength of bituminous roofing membranes. The test involves measuring the maximum load required to fail notched specimens of…
📋 Test Scope and Significance This test method, designated ASTM D4074/D4074M-11 (Reapproved 2022), covers the determination of the bitumen content of adhered aggregate surfacing on a roof, as well as the approximate mass per unit area of the flood coat…
📐 Scope and Test Summary ASTM D4072-23 defines the empirical procedure for determining the Toluene-Insoluble (TI) content in tar and pitch. The scope explicitly notes that strict adherence to all procedural details is mandatory due to the empirical nature of…
🔍 Standard Scope and Composition The ASTM D4070-15 (Reapproved 2022) standard specifies an adhesive lubricant used for facilitating the insertion and positioning of preformed elastomeric bridge compression seals in concrete or steel-faced joints. The lubricant bonds the seal to joint…
ASTM D4071-23 provides a structured guide for the specification, application, and use of water barrier membrane systems on Portland cement concrete bridge decks. Designed to protect structures from the damaging effects of deicing salts, this standard covers liquid applied, preformed,…
ASTM D4069-95 (Reapproved 2020) provides the standard specification for virgin impregnated activated carbon used to remove gaseous radio-iodine species from gas streams. The values stated in SI units are regarded as standard, and the specification is under the jurisdiction of…
📐 Purpose and Scope of the D4067-23 Standard ASTM D4067-23 establishes a classification system for reinforced and filled poly(phenylene sulfide) (PPS) materials used in injection molding and extrusion. It provides a standardized line call-out system using ASTM test methods, ensuring…
ASTM D4068-17 (Reapproved 2022), an American National Standard, provides the definitive specification for flexible chlorinated polyethylene (CPE) sheeting. This material is specifically engineered for use as a concealed water-containment membrane in high-stakes construction environments such as fountains, pools, planter boxes,…
📐 Scope and Applicable Materials ASTM D4065-20 establishes a standardized practice for collecting and reporting dynamic mechanical properties of plastics. This practice is designed to characterize the viscoelastic behavior of materials by measuring their response to oscillatory deformations across a…